DOI QR코드

DOI QR Code

이진가중형 유체 디지털-아날로그 변환기를 이용한 고정도 미소유량 조절기

Digital Microflow Controllers Using Fluidic Digital-to-Analog Converters with Binary-Weighted Flow Resistor Network

  • 윤상희 (한국과학기술원 디지털나노구동연구단) ;
  • 조영호 (한국과학기술원 디지털나노구동연구단)
  • 발행 : 2004.12.01

초록

This paper presents digital microflow controllers(DMFC), where a fluidic digital-to-analog converter(DAC) is used to achieve high-linearity, fine-level flow control for applications to precision biomedical dosing systems. The fluidic DAC, composed of binary-weighted flow resistance, controls the flow-rate based on the ratio of the flow resistance to achieve high-precision flow-rate control. The binary-weighted flow resistance has been specified by a serial or a parallel connection of an identical flow resistor to improve the linearity of the flow-rate control, thereby making the flow-resistance ratio insensitive to the size uncertainty in flow resistors due to micromachining errors. We have designed and fabricated three different types of 4-digit DMFC: Prototype S and P are composed of the serial and the parallel combinations of an identical flow resistor, while Prototype V is based on the width-varied flow resistors. In the experimental study, we perform a static test for DMFC at the forward and backward flow conditions as well as a dynamic tests at pulsating flow conditions. The fabricated DMFC shows the nonlinearity of 5.0% and the flow-rate levels of 16(2$^{N}$) for the digital control of 4(N) valves. Among the 4-digit DMFC fabricated with micromachining errors, Prototypes S and P show 27.2% and 27.6% of the flow-rate deviation measured from Prototype V, respectively; thus verifying that Prototypes S and P are less sensitive to the micromachining error than Prototype V.V.

키워드

참고문헌

  1. Shoji, S. and Esashi, M, 1994, 'Microflow Devices and Systems,' Journal of Micromechanics and Microengineering, Vol. 4, No.4, pp. 157-171 https://doi.org/10.1088/0960-1317/4/4/001
  2. Zdeblick, M. J., Barth, P. P. and Angell, J. B., 1998, 'A Microminiature Fluidic Amplifier,' Sensors and Actuators, Vol. 15, pp. 427-433 https://doi.org/10.1016/0250-6874(88)81511-7
  3. Henning, A. K., Fitch, J., Hopkins, D., Lilly, L., Faeth, R., Falsken, E. and Zdeblick, M, 1997, 'A Thermopneumatically Actuated Microvalve for Liquid Expansion and Proportional Control,' International Conference on Solid State Sensors and Actuators, Vol. 2, pp. 825-828 https://doi.org/10.1109/SENSOR.1997.635228
  4. Vandelli, N., Wroblewski, D., Velonis, M. and Bifano, T., 1998, 'Development of a MEMS Microvalve Array for Fluid Flow Control,' Journal of Microelectromechanical Systems, Vol. 7, No.4, pp. 395-403 https://doi.org/10.1109/84.735347
  5. Lee, W. Y., Wong, M. and Zohar, Y., 2002, 'Pressure Loss in Constriction Microchannels,' Journal of Microelectromechanical Systems, Vol. 11, No.3, pp. 236-244 https://doi.org/10.1109/JMEMS.2002.1007402
  6. Toshiyoshi, H., Kobayashi, D., Mita, M, Hashiguchi, G., Fujita, H. and Endo, J., 2000, 'Microelectromechanical Digital-to-Analog Converters of Displacement for Step Motion Actuators,' Journal of Microelectromechanical Systems, Vol. 9, No.2, pp. 218-225 https://doi.org/10.1109/84.846702