Journal of Mechanical Science and Technology

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지

Nonlinear Parameter Identification of Partial Rotor Rub Based on Experiment

  • Choi, Yeon-Sun (School of Mechanical Engineering, Sungkyunkwan University)
  • Published : 2004.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

To model and understand the physics of partial rub, a nonlinear rotor model is sought by applying a nonlinear parameter identification technique to the experimental data. The results show that the nonlinear terms of damping and stiffness should be included to model partial rotor rub. Especially, the impact and friction during the contact between rotor and stator are tried to explain with a nonlinear model on the basis of experimental data. The estimated nonlinear model shows good agreements between the numerical and the experimental results in its orbit. Also, the estimated nonlinear model could explain the backward whirling orbit and jump phenomenon, which are the typical phenomena of partial rub.

Keywords

References

  1. Billings, S. A., 1999, 'A Direct Approach to Identification of Nonlinear Differential Models From Discrete Data,' Mechanical System and Signal Processing, Vol. 13, pp.739-755 https://doi.org/10.1006/mssp.1999.1230
  2. Black, H. F., 1968, 'Interaction of a Whirling Rotor with a Vibrating Stator Across a Clearance Annulus,' J. Mechanical Engineering Science, Vol. 10, pp. 1-12 https://doi.org/10.1243/JMES_JOUR_1968_010_003_02
  3. Chen, S., Billings, S. A. and Luo, W., 1989, 'Extended Model Set, Global Data and Threshold Model Identification of Severely Non-linear System,' International Journal of Control, Vol. 50, pp. 1897-1923 https://doi.org/10.1080/00207178908953473
  4. Choi, Y. S., 2000, 'Experimental Investigation of Partial Rotor Rub,' KSME International Journal, Vol. 14, No. 11, pp. 1250-1256
  5. Choi, Y. S., 2002, 'Investigation on the Whirling Motion of Full Annular Rotor Rub,' Journal of Sound and Vibration, Vol. 258, No. 1, pp.191-198 https://doi.org/10.1006/jsvi.2002.5091
  6. Choy, F. K., Padovan, J. and Batur, C; 1989, 'Rub Interactions of Flexible Casing Rotor Systems,' Journal of Engineering for Gas Turbines and Power, Vol. 111, pp. 652-658 https://doi.org/10.1115/1.3240308
  7. Chu, F. and Zhang, Z., 1997, 'Periodic, Quasi-Periodic and Chaotic Vibrations of a Rub-Impact Rotor System Supported on Oil Film Bearings,' Int. J. Engr. Sci., Vol. 35, No. 10/11, pp.963-973 https://doi.org/10.1016/S0020-7225(97)89393-7
  8. Crandall, S. H., Lingener, A. and Zhang, W., 1990, 'Backward Whirl Due to Rotor-Stator Contact,' Proceedings of 12th International Conference on Nonlinear Oscillations, Cracow, September 27
  9. Erich, F. F. and O'Connor, J. J., 1966, 'Stator Whirl with Rotor in Bearing Clearance,' ASME Paper 66, WA/MD-8
  10. Jang, H. K. and Kim, K. J., 1994, 'Identification of Cubic Stiffness Nonlinearity by Linearity-Conserved NARMAX Modeling,' KSME International Journal, Vol. 8, No. 3, pp. 332-342 https://doi.org/10.1007/BF02953362
  11. Lee, C. W., 1994, 'Development of the Use of Directional Frequency Response Functions for the Diagnosis of Anisotropy and Asymmetry in Rotating Machinery,' Mechanical Systems and Signal Processing, Vol. 8, No. 6, pp. 665-678 https://doi.org/10.1006/mssp.1994.1047
  12. Lin, F., Schoen, M. P. and Korde, U. A., 2001, 'Numerical Investigation with Rub-related Vibration in Rotating Machinery,' Journal of Vibration and Control, Vol. 7, pp. 833-848 https://doi.org/10.1177/107754630100700604
  13. Muszynska, A. and Goldman, P., 1995, 'Chaotic Responses of Unbalanced Rotor/bearing/Stator Systems with Looseness or Rubs,' Chaos Solitons & Fractals, Vol. 5, No. 9, pp. 1683-1704 https://doi.org/10.1016/0960-0779(94)00171-L
  14. Muszynska, A., 1984, 'Partial Lateral Rotor to Stator Rubs,' ImechE C281/84, pp. 327-335