References
- USNRC, 1996, 'Steam Generator Tube Failures,' NUREG/CR6365
- USNRC, 1976, 'Bases for Plugging Degraded PWR Steam Generator Tubes,' Regulatory Guide 1.121
- ASME, 1998, 'Rules for Construction of Nuclear Power Plant Components,' ASME Boiler and Pressure Vessel Code, Section III
- Cochet, B. and Flesch, B., 1987, 'Crack Stability Criteria in Steam Generator Tubes,' 9th Int. Conference on SMiRT, Vol. D, pp. 413-419
- Yu, Y.J., Kim, J.H., Kim, Y. and Kim, Y.J., 1994, 'Development of Steam Generator Tube Plugging Criteria for Axial Crack,' ASME PVP, Vol. 280, pp. 79-83
- Kim, H.D., Chung, H.S. and Hong, S.R., 1999, 'Discussion on Operation Leakage Criteria of Ulchin Unit 1&2 Steam Generators,' Proceedings of the Korean Nuclear Society Autumn Meeting
- Kim, H.D, Kim, K.T. and Chung, H.S, 1999, 'Structural Integrity Assessment on Axial PWSCC of Steam Generator Tubes,' Proceedings of the Korean Nuclear Society Autumn Meeting
- Gorman, J.A., Harris, J.E. and Lowenstein, D.B., 1995, 'Steam Generator Tube Fitness-for-Service Guidelines,' AECB Report, No. 2.228.2
- Lee, J.H., Park, Y.W., Song, M.H., Kim, Y.J. and Moon, S.I., 2000, 'Determination of Equivalent Single Crack Based on Coalescence Criterion of Collinear Axial Cracks,' Nuclear Engineering and Design, Vol. 205, pp. 1-11 https://doi.org/10.1016/S0029-5493(00)00368-X
- Kim, J.S. et al., 1999, 'Investigation Report for Steam Generator Tubes Pulled Out from Ulchin # 1.'
- Murakami, Y, 1987, 'Stress Intensity Factors Handbook,' pp. 204-205
- Cho, Y.J., 1990, 'A Study on the Interaction Effect of Adjacent Semi-Elliptical Crack,' Master's Thesis
- Hasegawa, H., Miyazaki, K. and Kanno, S., 2001, 'Interaction Criteria for Multiple Flaws on the Basis of Stress Intensity Factors,' ASME PVP, Vol. 422, pp. 23-29
- Moussa, W.A., Bell, R. and Tan, C.L., 1999, 'The Interaction of Two Parallel Non-Coplanar Identical Surface Cracks under Tension and Bending,' Int. J. PVP, Vol. 76, pp. 135-145 https://doi.org/10.1016/S0308-0161(98)00125-2
- Park, J.H., 1996, 'Analysis of an Isotropic Infinite Plate with Many Collinear Multiple Cracks by the Alternating Method,' Transactions of the KSME A, Vo. 20, No. 12, pp. 3838-3846
- Moon, S.I, Kim, Y.J. and Lee, J.H, 2003, 'Estimation of Plastic Collapse Load of Steam Generator with Two Parallel Axial Through-Wall Cracks,' ASME PVP, Vol. 464, pp. 223-230
- Kim, Y.J., Choy, Y.S. and Lee, J.H., 1993, 'Development of Fatigue Life Prediction Program for Multiple Surface Cracks,' ASTM STP 1189, pp. 536-550
- Shibata, K., Yokoyama, N., Ohba, T., Kawamura, T. and Miyazono, S., 1985, 'Growth Evaluation of Fatigue Cracks from Multiple Surface Flaws (I),' J. Japanese Nuclear Society, Vol. 28, No.2, pp. 250-262
- Shibata, K., Yokoyama, N., Ohba, T., Kawamura, T. and Miyazono, S., 1986, 'Growth Evaluation of Fatigue Cracks from Multiple Surface Flaws (II),' J. Japanese Nuclear Society, Vol. 28, No.3, pp. 258-265
- Park, Y.W., Song, M.H. and Lee, J.H., 2000, 'Steam Generator Tube Integrity Program,' KINS/RR-001
- Lee, J.H., Park, Y.W., Song, M.H., Kim, Y.J. and Moon, S.I., 2000, 'Evaluation of Plugging Criteria on Steam Generator Tubes and Coalescence Model of Collinear Axial Through-Wall Cracks,' J. Korean Nuclear Society, Vol. 32, pp. 465-476
- Diercks, D.R., 2000, 'Steam Generator Tube Integrity Program Monthly Report,' ANL.
- Diercks, D.R., 1998, 'Steam Generator Tube Integrity Program Monthly Report,' ANL.
- EPRI, 1991, 'Steam Generator Tube Integrity,' EPRI NP-6865-L, Vol. 1
- Mcllree, A., 2002, 'Steam Generator Tubing Burst Testing and Leak Rate Testing Guidelines,' EPRI, Technical Report 1006783
- Erdogan, F., 1976, 'Ductile Failure Theories for Pressurized Pipes and Containers,' Int. J. PVP, Vol. 4
Cited by
- Determination of failure pressure for tubes with two non-aligned axial through-wall cracks vol.144, pp.2, 2007, https://doi.org/10.1007/s10704-007-9082-5