Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

The Minimizing of Cutting Depth using Vibration Cutting

진동절삭법을 이용한 절삭깊이의 최소화

  • 손성민 (부산대학교 정밀정형 및 금형가공 연구소) ;
  • 안중환 (부산대학교 기계공학부)
  • Published : 2004.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper discusses the minimum cutting thickness with a continuous chip in sub-micrometer order precision diamond cutting. An ultra precision cutting model is proposed, in which the tool edge radius and the friction coefficient are the principal factors determining the minimum cutting thickness. The experimental results verify the proposed model and provide various supporting evidence. In order to reduce the minimum cutting thickness a vibration cutting method is applied, and the effects are investigated through a series of experiments under the same conditions as conventional cutting method.

Keywords

References

  1. BASURAY, P.K., MISRA, B.K. and LAL, G.K., 'TRANSITION FROM PLOUGHING TO CUTTING DURING MACHINING WITH BLUNT TOOL,' Wear, 43, pp.341-349, 1977 https://doi.org/10.1016/0043-1648(77)90130-2
  2. Lucca, D.A., Seo, Y.W., 'Effect of Tool Edge Geometry on Energy Dissipation in Ultraprecision Machining,' Annals of the CIRP, Vol. 42/1/1993
  3. Yuan, Z.J., Zhou, M. and Dong, S., 'Effect of diamond tool sharpness on minimum cutting thickness and cutting surface integrity in ultraprecision machining,' Journal of Materials Processing Technology, 62, pp.327-330, 1996 https://doi.org/10.1016/S0924-0136(96)02429-6
  4. Kim, Jeong-Du, Kim, Dong Sik, 'Theoretical analysis of micro-cutting characteristics in ultra-precision machining,' Journal of Materials Processing Technology, 49 (1995) 387-398 https://doi.org/10.1016/0924-0136(94)01345-2
  5. Kim, KugWeon, 'A Study on the Critical Depth of Cut in Ultra-precision Machining,' Journal of KSPE, Vol.19, No.8, pp.126-133, 2002
  6. Son, SeongMin, Lim, HanSeok and Ahn, JungHwan, 'A Study on Critical Depth of Cuts in Micro Grooving,' KSME International Journal, Vol. 17, No. 2, pp. 239-245, 2003
  7. Bhushan, Bharat 'Handbook of Micro/Nano Tribology,' CRC Press, 1999
  8. STOLARSKI, T.A., 'Tribology in Machine Design,' Industrial Press Inc., 1990
  9. Liang, Y.N., Li, S.Z., Li, D.F., Li, S., 'Some developments for single-pass pendulum scratching,' WEAR, 199, pp. 66-73. 1996 https://doi.org/10.1016/0043-1648(96)07218-3