소성∙가공 (Transactions of Materials Processing)

  • 제13권7호
  • /
  • Pages.608-613
  • /
  • 2004
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

금형주조한 Al-Si 과공정합금의 초정 Si 입자거동에 따른 기계적 성질 변화

Effect of Primary Si on Mechanical Properties in Hypereutectic Al-Si Alloy Produced by Gravity Die Casting

  • 김억수 (동남정밀(주) 생산기술연구소)
  • 발행 : 2004.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Mechanical properties of hypereutectic Al-Si alloy are influenced by the size and distribution of primary Si. To investigate the effects of P addition and holding time, hypereutectic Al-Si alloys with various amount of P content were produced in the lab. Then, the size and distribution of primary Si were examined respectively. Mechanical properties of hardness, tensile strength and wear resistance were analyzed in conjunction with the microstructural variations in alloys.

키워드

참고문헌

  1. 한국주조공학회지 v.17 no.4 과공정 Al-Si 합금의 초정 Si 미세화에 미치는 냉각속도와 P첨가량의 영향 한상봉;김지훈;류봉선;박원욱;예병준
  2. 한국주조공학회지 v.15 no.4 기계적 합금화법에 의한 과공정 Al-Si 합금 미세화제 개발 및 개량효과에 관한 연구 박재영;이재상;나형용
  3. J. Mat. Sci. v.22 S. Das;A. H. Yegneswaran;P. K. Rohatgi https://doi.org/10.1007/BF01161179
  4. Journal of Japan Institute of Light Metals v.34 no.4 Adachi, M. https://doi.org/10.2464/jilm.34.430
  5. AFS Trans. v.82 G. K. Sigworth
  6. The 3rd International Conference on Aluminium Alloys v.1 P. A. Tondel;L. Arnbery
  7. 한국주조공학회지 v.15 no.5 P에 의한 과공정 Al-Si합금의 미세화처리 주대헌;김명호
  8. AFS Trans. v.73 G. A. Colligen;M. A. Gunes
  9. AFS Trans. v.74 P. B. Crosley;L. F. Mondolfo
  10. 한국주조공학회지 v.18 no.5 Al 합금의 응고(III)-과공정 Al-Si 합금의 개량화 특성 한상봉;김지훈;예병준
  11. METALS AND MATERIALS v.4 no.6 Microstructure and Mechanical Properties of Rapidly Solidified Al-20Si-xFe-3Cu-1Mg(x=0 and 5 wt.%) Extrudates T. S. Kim;K. H. Kim;W. T. Kim;C. W. Won;S. S. Cho;B. S. Chun https://doi.org/10.1007/BF03025990
  12. METALS AND MATERIALS v.5 no.4 Role of the Primary Silicon Particle on the Dry Sliding Wear of Hypereutectic Aluminium-silicon A390 Jung-Moo Lee;Suk-Bong Kang;Sang-Chul Yoon
  13. 한국주조공학회지 v.13 no.1 주조용 과공정 Al-Si 합금 정운재;김기태;김상훈
  14. Journal of Japan Institute of Light Metals v.37 H. Yamata;T. Tanaka;E. Okomu https://doi.org/10.2464/jilm.37.83
  15. AFS Trans. v.92 J. L. Jorstad