Presentation of the Efficient Leakage Detection by the Measurement of Indirect Media-Propagated AE Signal

간접 매체로 전파된 AE신호 측정을 통한 효과적인 누설 검출기법 제시

  • 이성재 (부산대학교 대학원 정밀기계공학과) ;
  • 김전하 (㈜테크노라이) ;
  • 강명창 (부산대학교 정밀정형 및 금형가공 연구) ;
  • 김정석 (부산대학교 기계공학부)
  • Published : 2004.09.01

Abstract

The high pressure vessels that are constructed by welding process have many welding lines and most of the leakage defects are occurred on these welding lines. The acoustic emission(AE) technique has adopted to detect the defect location and leakage on welding parts, but the AE signal in leakage are incomplete due to the attenuation, reiteration, instability and limit of defect size. To overcome these troubles, the experiments in this study are conducted to measure the indirect media-propagated AE signal perpendicular to the leakage hole. The AE signals that are acquired from the direct and indirect media are analyzed, and the reliability of the indirect media-propagated AE signal are examined experimentally. By AE signal investigation, this method can be adopted to detect efficiently the leakage in welding parts.

Keywords

References

  1. Palaniappan, M., Thomas, P. V., Rao, B. S. C. and Chandramohan, R., 'Mass Spectrometer Helium Leak Testing of Large Volume Pipelines and Pressure Vessels of a Nuclear Power Plant,' Int. J. Pres. Ves. & piping, 73. pp. 39-44, 1997 https://doi.org/10.1016/S0308-0161(97)00032-X
  2. Chapetti, M. D., Otegui, J. L., Manfredi, C. and Martins, C. F., 'Full Scale Experimental Analysis of Stress States in Sleeve Repairs of Gas Pipelines,' Int. J. Pres. Ves. & piping, 78, pp. 379-387, 2001 https://doi.org/10.1016/S0308-0161(00)00063-6
  3. Seo, J. W., Seok, C. S. and Kim, Y. J., 'Evaluation of Fracture Behavior of High Tension Steel by AE Amplitude Distribution,' Journal of Korea Society Precision Engineering, Vol. 16, No. 5, pp. 175-185, 1999
  4. Xiaorong, L. and Igor, G., 'Use of an Automatic Modeled and a Small Receiver Array for Acoustic Emission(AE) Source Location,' Journal of Ultrasonics, Vol. 36, pp. 539-547, 1998 https://doi.org/10.1016/S0041-624X(97)00099-1
  5. Xin, L. and Guangjun, C., 'Investigation of Fracture and Determination of Fracture Toughness of Modified 9Cr-1Mo Steel Weld Metals using AE technique,' Journal of Materials Science and Engineering, A270, pp. 260-266, 1999 https://doi.org/10.1016/S0921-5093(99)00190-2
  6. Hawkes, M. and Nehorai, A., 'Effects of Sensor Placement on Acoustic Vector-Sensor Array Performance,' IEEE Journal of Materials and Engineering, Vol. 24, No. 1, pp. 33-40, 1999 https://doi.org/10.1109/48.740154