References
- Cannon, D. F. and Pradier, H., 1996, 'Rail Rolling Contact Fatigue Research by the European Rail Research Insititue,' Wear, 191, pp. 1-13 https://doi.org/10.1016/0043-1648(95)06650-0
- Bijak-Aochowski, M., 1997, 'Residual Stress in Some Elasto-Plastic Problems of Rolling Contact with Friction,' Int. J. Mech. Sci. Vol. 39, pp. 15-32 https://doi.org/10.1016/0020-7403(96)00018-5
- Kulkarni, S. M., 1991, 'Elasto-Plastic FE Analysis of Repeated Three Dimensional, Elliptical Rolling Contact with Rail Wheel Properties,' Transactions of the ASME, Vol. 113, pp. 434-441
- Gordon, J. and Perlman, A., 1998, 'Estimation of Residual Stresses in Railroad Commuter Car Wheels Following Manufacture,' ASME IMECE RTD
- Kim, K. J. and Choi, K. J., 1993, 'A Study on Countermeasure of Damage of Railway Wheel,' Railway Technology Report, Vol. 27, pp. 201-233
- Seo, J. W., Suk, C. S. and Kim, Y. J., 2002, 'Change of Residual Stress of Railway Wheel by Brake Condition,' Proceedings of the KSME Material and Fracture part, pp. 176-182
- Donzella, G. and Scepi, M., 1998, 'The Effect of Block Braking on the Resdual Stress State of a Solid Railway Wheel,' IMechE, pp. 145-158
- Lundin, R., 1991, 'Contact Region Fatigue of Railway Wheels Under Combined Mechanical Rolling Pressure and Thermal Brake Loading,' wear 144, pp. 57-70 https://doi.org/10.1016/0043-1648(91)90006-G
- Ekberg, A. and Bjarnehed, H., 1995, 'A Fatigue Life Model for Gerneral Rolling Contact with Application to Wheel/Rail Damage,' Fatigue Fract. Eneng Mater. Struct. Vol. 18, pp. 1189-1199 https://doi.org/10.1111/j.1460-2695.1995.tb00847.x
- Sraml, M. and Flasker, J., 2003, 'Numerical Procedure for Predicting the Rolling Contact Fatigue Crack Initiation,' Int. Journal of Fatigue 25, pp. 585-595 https://doi.org/10.1016/S0142-1123(03)00019-7
- Noda, T., 2002, 'Safety of Wheels and Axles for Railway Vehicles and Engineering Ethics,' Forum Vol. 7 No. 7, pp. 9-16
- Joo, J. W. and Park, C. K., 1998, 'Determination of Non-Uniform Residual Stress by the Hole Drilling Method,' Transactons of the KSME A Vol. 22, No. 2, pp. 268-277
- Kim, C, Suk, C. S. and Yang, W. H., 2000, 'Influence of the Hole Eccentricity in Residual Stresses Measurement by the Hole-drilling Method,' Transactons of the KSME A, Vol. 24, No. 8, pp. 2059-2064
- Idemura, K., 1997, 'Brake Technology of Railway Vehicle,' Research of Machine, Vol. 49, pp. 49-68
- Johnson, K.L., 1985, 'Contact Mechanics,' Cambridge University Press, pp. 99-104
- Ringsberg, J.W., 2000, 'Prediction of Fatigue Crack Initiation for Rolling Contact Fatigue,' Int. Journal of Fatigue 22, pp. 205-215 https://doi.org/10.1016/S0142-1123(99)00125-5
- Moyar, G., 1991, 'An Analysis of the Thermal Contributions to Railway Wheel Shelling,' Wear, 144, pp. 117-138 https://doi.org/10.1016/0043-1648(91)90010-R
- Mutton, P., 1991, 'Rolling Contact Fatigue in Railway Wheels Under High Axle Loads,' Wear, 144, pp. 193-152 https://doi.org/10.1016/0043-1648(91)90011-I
Cited by
- Integrated shape-morphing and metamodel-based optimization of railway wheel web considering thermo-mechanical loads pp.1615-1488, 2019, https://doi.org/10.1007/s00158-018-02188-1