초록
콤팩트디스크(CD-R; Compact DiskRecordable)를 성분별로 분리하여 제작하고, 다층 박막 구조를 만들어서 레이저빔의 에너지를 변화시켜 가면서 조사하여 각 성분 층에서의 최적 미소 점 마킹 조건과 홈 형성 과정에 관하여 연구하였다. 본 연구는 Q-스위치 Nd:YAG 레이저를 이용하여 준비된 각 시료의 표면에 27∼373 mJ 빔을 80 $\mu\textrm{m}$의 점적 크기로 조사하여 샘플에 형성된 흠 형태를 광학현미경(OM; Optical Microscope)과 광 결맞음 단층촬영기(OCT; Optical Coherence Tomography)로 비교-관찰하여 미소 점 마킹의 형성 과정을 분석하였다. 다층 박막에서 용융된 기판 층은 짧은 시간동안 충분한 열 흐름이 발생하여 증배의 형성을 야기하며, 반사 층과 염료 층 사이에 흡수된 에너지는 염료를 용융시키고 체적을 증가시켰으며, 증배가 식으면서 표면장력의 영향 및 레이저빔에 의한 순간적인 시편의 온도상승으로 기화와 반동압력에 의한 질량흐름 때문에 두 층의 경계면에서 홈과 외륜의 발생을 설명할 수 있었다. 따라서 다층 박막에서의 미소 점 마킹의 형성 과정은 표면장력, 용융 점성력, 층 두께, 다층 박막 성분 물질의 물리화학적ㆍ광학적 성질과 관계가 있음을 알 수 있었다.
We separated the multilayer structure of CD-R(compact disk-recordable) and investigated optimal spot marking conditions and physical and chemical transitions in response to various laser beam energh levels. Spot marking(80 ${\mu}{\textrm}{m}$ spot size) was produced on the surface of each layer using a Q-switched Nd:YAG laser between 27 mJ and 373mJ. By investigating resulting pit formation with Optical Microscopy(OM) and Optical Coherence Tomography(OCT), we analyzed the formation process of spot marking in the multilayer structure of different chemical composition. The localized heating of the substrate in the multilayer thin film caused the short temporal thermal expansion, and absorbed optical energy between reflective and dye interfaces melted dye and increased the volume. During the cooling phase, formation of pit and surrounding rim can be explained by three distinct processes; effect of surface tension, evaporation by spontaneous temperature increase due to laser energy, and mass flow from the recoil pressure. Our results shows that the spot marking formation process in the multilayer thin film is closely related to the layers' physical, chemical, and optical properties, such as surface tension, melt viscosity, layer thickness, and chemical composition.