참고문헌
- J. Kor. Ceram. Soc. v.39 no.10 Fabrication of Double-layered Porous Materials J. Y. Yun;H. D. Kim;C. H. Hong https://doi.org/10.4191/KCERS.2002.39.10.919
- J. Kor. Ceram. Soc. v.27 no.2 Studies on the Oxide Bonded Silicon Cabide Porous Matrials J. C. Lee;I. H. Kook
- J. Mater. Sci. v.39 no.10 Effect of Inert filler Addition on Pore Size and Porosity of Closed-Cell Silicon Oxycarbide Foams S. H. Kim;Y. W. Kim;C. B. Park https://doi.org/10.1023/B:JMSC.0000026964.88284.ab
- J. Am. Ceram. Soc. v.82 no.3 Silicon Oxycabide Ceramic Foams from a Preceramic Polymer P. Colombo;M. Modesti https://doi.org/10.1111/j.1151-2916.1999.tb01803.x
- Am. Ceram. Soc. Bull. v.76 Gelcasting Foams for Porous Ceramics P. Sepulveda
- Mat. Res. Innovat. v.6 no.1 Ceramic Foams from Preceramic Polymers P. Colombo;J. R. Hellmann https://doi.org/10.1007/s10019-002-0209-z
- J. Am. Ceram. Soc. v.83 no.12 Properties of Highly Porous Hydroxyapatite Obtained by the Gelcasting of Foams P. Sepulveda;F. S. Ortega;M. D. M. Innocentini;V. C. Pandolfelli https://doi.org/10.1111/j.1151-2916.2000.tb01677.x
- J. Am. Ceram. Soc. v.84 no.10 Conductive Ceramic Foams from Preceramic Polymers P. Colombo;T. Gambaryan-Roisman;M. Scheffler;P. Buhler;P. Greil https://doi.org/10.1111/j.1151-2916.2001.tb01000.x
- J. Eur. Ceram. Soc. v.19 Processing of Cellular Ceramics by Foaming and in situ Polymerization of Organic Monomers P. Sepulveda;J. G. P. Binner https://doi.org/10.1016/S0955-2219(99)00024-2
- J. Mater. Sci. Lett. v.21 no.21 Fabrication of Porous Preceramic Polymers Using Carbon Dioxide Y. W. Kim;S. H. Kim;X. Xu;C. H. Choi;C. B. Park;H. D. Kim https://doi.org/10.1023/A:1020820608722
- Comp. Sci. & Tech. v.63 no.14 Processing of Microcellular Preceramics Using Carbon Dioxide Y.-W. Kim;C. B. Park https://doi.org/10.1016/S0266-3538(03)00270-7
- J. Am. Ceram. Soc. v.86 no.12 Fabrication of Microcellular Ceramics Using Gaseous Carbon Dioxide Y.-W. Kim;S. H. Kim;C. Wang;C. B. Park https://doi.org/10.1111/j.1151-2916.2003.tb03641.x
- J. Kor. Ceram. Soc. v.39 no.10 Mechanical Properties of Porous Reaction Bonded Silicon Carbide S. S. Hwang;S. W. Park;J. H. Han;K. S. Han;C. M. Kim https://doi.org/10.4191/KCERS.2002.39.10.948
- J. Kor. Ceram. Soc. v.20 no.2 Reactive Sintering of SiC Y.-W. Kim;J. G. Lee
- Ceram. Int. v.7 no.3 The Investigation of High-Temperature Strength of SiC Based Refractories M. Komac https://doi.org/10.1016/0272-8842(81)90006-7
- J. Mater. Sci. v.34 Influence of the Preparation Conditions on the Synthesis of High Surface Area SiC for Use as a Heterogeneous Catalyst Support N. Keller;C. Pham-Huu;S. Roy;M. J. Kedoux;C. Estournes;J. Guille https://doi.org/10.1023/A:1004681806843
- J. Non-Cryst. Solids v.121 Synthesis of Cellular Inorganic Materials by Foaming Sol-Gels W. Wu;T. Fujiu;G. L. Messing https://doi.org/10.1016/0022-3093(90)90167-K
- Adv. Ceram. Mater. v.2 no.4 Open Cell, Low-Density Ceramics Fabricated from Reticulated Polymer Substrates F. F. Lange;K. T. Miller
-
J. Mater. Sci.
v.26
Pressureless Sintering of
$Al_2O_3$ -SiC Whisker Composites Y.-W. Kim;J. G. Lee https://doi.org/10.1007/BF00544471 -
J. Mater. Sci.
v.38
Microstructure and Fracture Toughness of Liquid-Phase-Sintered
${\beta}$ -SiC Containing${\beta}$ -SiC Whiskers as Seeds S. H. Kim;Y.-W. Kim;M. Mitomo https://doi.org/10.1023/A:1022812427677 - J. Mater. Sci. v.35 Pressureless Sintering of SiC-TiC Composites with Improved Fracture Toughness Y.-W. Kim;S. G. Lee;Y. I. Lee https://doi.org/10.1023/A:1004848828322
- Am. Ceram. Soc. Bull. v.81 no.5 Clayware Mechanical Properties Porosity Dependent H. S. Kim;T. Guifang;J. Y. Kim
- Introduction to Ceramics W. D. Kingery;H. K. Bowen;D. R. Uhlman
- Porosity of Ceramics R. W. Rice
- J. Am. Ceram. Soc. v.80 no.2 Strain Tolerant Porous Nitride Y. Shigegaki;M. E. Brito;K. Hiaro;M. Toriyama;S. Kanzaki https://doi.org/10.1111/j.1151-2916.1997.tb02856.x
피인용 문헌
- Flexural Strength of Macroporous Silicon Carbide Ceramics vol.48, pp.5, 2011, https://doi.org/10.4191/kcers.2011.48.5.360
- Effect of SiC Filler Content on Microstructure and Flexural Strength of Highly Porous SiC Ceramics Fabricated from Carbon-Filled Polysiloxane vol.49, pp.6, 2012, https://doi.org/10.4191/kcers.2012.49.6.625
- Composite Membrane by Dip-coating Process vol.50, pp.6, 2013, https://doi.org/10.4191/kcers.2013.50.6.485
- Gas Permeation of Y2O3-SiC Composite Membrane vol.52, pp.4, 2015, https://doi.org/10.4191/kcers.2015.52.4.234
- Preparation and Permeation of La2Ce2O7 Membrane vol.52, pp.4, 2015, https://doi.org/10.4191/kcers.2015.52.4.269
- Effect of Freezing and Sintering Condition of CuO-SnO2/Camphene Slurries on the Pore Structure of Porous Cu-Sn vol.23, pp.1, 2016, https://doi.org/10.4150/KPMI.2016.23.1.49
- Preparation and characterization of macroporous SiC ceramic membrane for treatment of waste water pp.1573-4854, 2018, https://doi.org/10.1007/s10934-017-0528-5
- Processing of Polymer-Derived Microcellular Ceramics Containing Reactive Fillers vol.534-536, pp.1662-9752, 2007, https://doi.org/10.4028/www.scientific.net/MSF.534-536.989
- Processing Techniques of a Silicon Carbide Heat Exchanger and its Capable Properties – A Review vol.787, pp.1662-7482, 2015, https://doi.org/10.4028/www.scientific.net/AMM.787.513
- Processing and mechanical properties of porous silica-bonded silicon carbide ceramics vol.11, pp.5, 2005, https://doi.org/10.1007/BF03027504