Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Prediction Technology on the Source Location of Acoustic Emission Signal in Plate with Welding Line

용접선을 갖는 판재에서 AE 신호원의 위치추정 기법

  • 이성재 (부산대학교 대학원 정밀기계공학과) ;
  • 정연식 (부산대학교 대학원 정밀기계공학) ;
  • 김정석 (부산대학교 기계공학) ;
  • 강명창 (부산대학교 정밀정형 및 금형가공연구) ;
  • 정규동 (㈜고려제강)
  • Published : 2004.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study deals with the prediction of defect location which can be occurred in structure. The existing methods was very difficult to be applied to predict it, because of complex numerical formula. The triangulation method proposed in this study can predict the source location easily with small amount of data. The arrival time of wave can be directly converted into the distance between sensors. For this purpose, the propagation velocity was measured by Rayleigh wave, and the propagation behavior was analyzed. The welded workpiece is adapted to investigate for the consideration of jointed part in structure, The propagation velocity of signal was measured in welded workpiece and the revised algorithm of source location was proposed.

Keywords

References

  1. Asher, M. S., Maryak, I., 'Neural network approach to locating acoustic emission sources in non-destructive evaluation,' Journal of Sound and Vibration, Vol.211, pp.133-143, 1996 https://doi.org/10.1006/jsvi.1997.1355
  2. Surgeon, M., Wevers, M., 'One sensor linear location of acoustic emission using plate wave theories,' Journal of Materials Science & Engineering, A265, pp.254-261, 1999 https://doi.org/10.1016/S0921-5093(98)01142-3
  3. Maji, A. K., Kratochvil, T., 'Acoustic emission source location using Lamb wave modes,' Journal of Engineering Mechanies, pp.154-161, 1997 https://doi.org/10.1061/(ASCE)0733-9399(1997)123:2(154)
  4. Seo, J. W., Seok, C. S., Kim, Y. J., Park, J. W., 'Evaluation of Fracture Behavior of High Tension Steel by AE Amplitude Distribution,' Journal of the Korea Society of Precision Engineering, Vol. 16, No. 5, pp. 175-185, 1999
  5. Xiaorong, L., Igor, G., 'Use of an automatic modeled and a small receiver array for acoustic emission (AE) source location,' Journal of Ultrasonics, Vol.36, pp.539-547, 1998 https://doi.org/10.1016/S0041-624X(97)00099-1
  6. Pantani, L., 'A Coherent-pulse superposition technique for velocity measurements on surface elastic wave,' IEEE Trans. on Sonic & Ultrasonics, Vol.19, No.3, pp.384-386, 1972 https://doi.org/10.1109/T-SU.1972.29691
  7. Malcolm, H., Arye, N., 'Effects of sensor placement on acoustic vector-sensor array performance,' IEEE Journal of Materials & Engineering, Vol.24, No.1, pp.33-40, 1999 https://doi.org/10.1109/48.740154