Abstract
This paper presents the design technique of output multiplexer(OMUX) for the Ka-band satellite transponder. Output multiplexer consists of low-pass filter(LPF), channel filter and manifold. Channel filters adopt dual-mode technique in design for mass and volume reduction and frequency response of channel filters is 4-pole elliptic response for high frequency selectivity. w-pass filters are designed to be of 13th order corrugated type for high rejection characteristic over reception band of satellite transponder. After initial design of channel filters and manifold, we optimized only a few design parameters for fast and easy optimization instead of optimizing all the design parameter. Measured results of a realized output umltiplexer for Ka-band satellite transponder show good agreement with the computed ones.
본 논문에서는 Ka대역 위성 중계기용 출력 멀티플렉서의 설계 및 제작에 대하여 언급하였다. 출력 멀티플렉서는 저역통과필터, 채널필터, 매니폴드(Manifold)로 구성되어 있으며, 위성 중계기의 무게와 부피를 최소화하기 위하여 채널필터는 이중모드로 설계하였다. 채널별 주파수 선택도를 높이기 위하여 채널필터는 4차 타원 응답형으로 설계하였으며, 저역통과 필터는 13차 corrugated 형으로 설계하였다. 채널필터와 매니폴드의 초기 설계 후 최적화 과정에 있어서 모든 설계 변수를 최적화시키는 대신 일부의 설계 변수만을 최적화시킴으로써 용이하게 최적화 설계할 수 있음을 확인하였다. 제작한 Ka 대역 위성 중계기용 출력 멀티플렉서의 측정결과는 설계결과와 동일한 특성을 나타내었다.