설비공학논문집 (Korean Journal of Air-Conditioning and Refrigeration Engineering)

  • 제16권8호
  • /
  • Pages.720-727
  • /
  • 2004
  • /
  • 1229-6422(pISSN)
  • /
  • 2465-7611(eISSN)
대한설비공학회 (The Society of Air-Conditioning and Refrigerating Engineers of Korea)
권호 표지

교반동력에 의한 기능성 물질 함유 수용액의 빙부착 평가

Evaluation of Ice Adhesion in an Aqueous Solution with Functional Materials by Stirring Power

  • 승현 (전북대학교 대학원) ;
  • 백종현 (생산기술연구원 냉동공조연구팀) ;
  • 홍희기 (경희대학교 기계산업시스템공학부) ;
  • 강채동 (전북대학교 기계항공시스템공학부)
  • Seung, Hyun (Graduate School of Mechanical Eng., Chonbuk National University) ;
  • Baek, Jong-Hyun (HVAC/R Research Team, KITECH) ;
  • Hong, Hee-Ki (School of Mechanical and Industrial System Eng., KyungHee University) ;
  • Kang, Chae-Dong (College of Eng., Division of Mechanical Eng., Chonbuk National University)
  • 발행 : 2004.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In the process of ice-slurry making, the phenomenon of ice adhesion influences extremely to ice making system. In this study, the effect on the ice adhesion by thermal storage material with additives is investigated quantitatively. Various solutions of 300 g in a stainless vessel were frozen under stirring. Through the experiment the ice adhesion between cooling wall and ice-slurry was compared with each other by measuring the stirring power. From the experiment, the stirring power in EG, SCA solution was smaller than those in the solution containing functional materials, such as poly-vinyl-alcohol or kitchen detergent.

키워드

참고문헌

  1. Proceeding of the SAREK 2003 Summer Annual Conference(Special session) Trends in supply of ice thermal storage system and its technolgy Lee,Y.P.
  2. Trans. JSME (B) v.66 no.641 Ice storage system with oil-water mixture (Actual proof of formation of high IPF suspension without adhesion of ice to cooling wall) Matsumoto,K.;Okada,M.;Kawagoe,T.;Kang,C.
  3. Trans. of the JSRAE v.18 no.1 Investigation of effective factor on ice formation process of ice thermal energy storage using water-oil emulsion effective of wall material and cooling rate to ice adhesion on cooling wall Kang,C.D.;Okada,M.;Oda,S.;Matsumoto,K.Kawagoe,T.
  4. The magazine of the SAREK v.14 no.5 Experimental study on flow patterns and pressure drop characteristics of ice slurry in small size pipe Lee,D.W.;Yoon,C.I.;Yoon,E.S.
  5. The magazine of the SAREK v.14 no.12 Adhesion of ice slurry in an aqueous solution cooling with stirling Kang,C.;Shon,K.;Peck,J.H.;Hong,H.
  6. The Magazine of the SAREK v.13 no.12 Study on ice making behavior of water solution with surfactant Park,K.W.;Inaba,H.;Horibe,A.
  7. The Magazine of the SAREK v.14 no.12 Adhesion of ice slurry in a multicomponent aqueous solution with stirring and cooling Kang,C.;Kang,Y.T.;Hong,H.
  8. International Journal of Refrigeration v.25 Microscale study of poly (vinyl alcohol) as an effective additive for ingibiting recrystallization in ice slurries Lu,S.S.;Inada,T.;Yabe,A.;Zhang,A.;Grandum,S. https://doi.org/10.1016/S0140-7007(01)00045-7
  9. Properties and Application of Surfactant Kariyone,T.
  10. The Magazine of the Eletrophoresis v.25 Review zeta potential of microfluidic substrates: 1. Theory, experimental techniques, and effects on separations Kirby,B.J.;Hasselbrink,E.F. https://doi.org/10.1002/elps.200305754
  11. Appleied Physics Letters v.83 no.8 Microstructures of poly (ethylene glycol) by molding and dewetting Suh,K.Y.;Robert,L. https://doi.org/10.1063/1.1604186