Arc-type Wheel Profile Design and Test Results

원호형 차륜답면형상(안) 설계 및 현차시험 결과

  • 허현무 (한국철도기술연구원 차량기계연구본부) ;
  • 권성태 (한국철도기술연구원 철도안전연구시험센) ;
  • 이찬우 (한국철도기술연구원 차량기계연구본) ;
  • 구동회 (한국철도기술연구원 기존철도기술개발사업단)
  • Published : 2004.06.01

Abstract

The rolling-stocks on conventional line have suffered wheel problems due to the incompatibility between wheel and track condition. Especially, The 1:40 coned wheel profile's wear is very severe and these increase wheel maintenance cost. Thus we designed several arc-type wheel profiles coned 1:/20 to reduce the wheel flange wear and analyzed the dynamic performance of designed profiles. Tests carried out in service line to analyse the dynamic performance and verify the wear reduction for two cases of profiles. Test results shows the equal level of dynamic performance and the improvement of wheel flange wear compared with the conical wheel profile coned 1:40.

Keywords

References

  1. Vijay K. Garg, and Rao V. Dukkipati, 'Dynamics of Railway Vehicle Systems', Academic Press 1984
  2. 日本機械學會編, '鐵道車輛のクス', 電氣車硏究會, 1996
  3. Nefzger, 'Development of the S1002 Wheel Profiles on the DB Network', ERRI Report DT81(C116)E
  4. 허현무, 이찬우, 권성태, 윤춘한, '기존선 차륜답면형상의 마모패턴 분석', 한국철도학회 춘계학술대회, pp.651-655, 2003
  5. 철도청, '국유철도건설규칙', 2000
  6. R. Heller, N.K. Cooperrider, 'Users Manual for Asymmetric Wheel/Rail Contact Characterization Program', 1977
  7. 'Calculation of Equivalent Conicities for the S1002 Wheel Profile on UIC60 Rails', ERRI Report DT54/E
  8. AEA Technology Rail, 'VAMPIRE User Manual', 2003
  9. 김의석, 허현무, 윤춘한, '차륜답면의 형상변화에 의한 접촉응력 분포 해석', 한국철도학회 춘계학술대회, pp.663-667, 2003
  10. 허현무 외, '경제적 차륜답면관리기술 개발 2차년도 최종보고서', 철도청, 2003