Macromolecular Research

  • 제12권3호
  • /
  • Pages.303-310
  • /
  • 2004
  • /
  • 1598-5032(pISSN)
  • /
  • 2092-7673(eISSN)
한국고분자학회 (The Polymer Society of Korea)
권호 표지

Preparation and Properties of Waterborne-Polyurethane Coating Materials Containing Conductive Polyaniline

  • Kim, Han-Do (Department of Textile Engineering, Pusan National University) ;
  • Kwon, Ji-Yun (Department of Textile Engineering, Pusan National University) ;
  • Kim, Eun-Young (Department of Textile Engineering, Pusan National University)
  • 발행 : 2004.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

We have prepared an aqueous dispersion of poly(aniline-dodecyl benzene sulfonic acid complex) (PANI-DC) that has an intrinsic viscosity (〔η〕) near 1.3 dL/g using aniline as a monomer, dodecyl benzene sulfonic acid(DBSA) as a dopant/emulsifier, and ammonium peroxodisulfate(APS) as an oxidant. We found that the electrical conductivity of a PANI-DC pellet was 0.7 S/cm. A waterborne-polyurethane (WBPU) dispersion, obtained from isophorone diisocyanate/polytetramethylene oxide glycol/dimethylol propionic acid/ethylene diamine/triethylene amine, was used as a matrix polymer. We prepared blend films of WBPU/PANI-DC with variable weight ratios (from 99/1 to 66/34) by solution blending/casting and investigated the effects that the PANI-DC content has on the mechanical and dynamic mechanical properties, hardness, electrical conductivity, and antistaticity of these films. The tensile strength, percentage of elongation, and hardness of WBPU/PANI-DC blend films all decreased markedly upon increasing the PANI-DC content. The antistatic half-life time ($\tau$$\sub$$\frac{1}{2}$/) of pure WBPU film was about 110 s, but we found that those of WBPU/ultrasound-treated PANI-DC blend films decreased exponentially from 1.2 s to 0.1 s to almost 0 s upon increasing the PANI-DC content from 1 wt% to 15 wt% to > 15 wt%, respectively.

키워드

참고문헌

  1. Synthetic Metals v.126 M. G. Han;S. K. Cho;S. G. Oh;S. S. Im https://doi.org/10.1016/S0379-6779(01)00494-5
  2. Synthetic Metals v.106 Y. Haba;E. Segal;M. Nakris;G. I. Titelman;A. Siegmann https://doi.org/10.1016/S0379-6779(99)00100-9
  3. Synthetic Metals v.122 B. J. Kim;S. G. Oh;M. G. Han;S. S. Im https://doi.org/10.1016/S0379-6779(00)00304-0
  4. Materials Chemistry and Physics v.9295 P. R. Somani
  5. Synthetic Metals v.101 T. Makela;J. Sten;A. Hujanen;H. Isotalo https://doi.org/10.1016/S0379-6779(98)01095-9
  6. Polymer v.41 S. Koul;R. Chandra;S. K. Dhawan https://doi.org/10.1016/S0032-3861(00)00340-2
  7. Optics & Photonic News no.August A. J. Heeger;J. Long
  8. Sci. Am. v.8 no.special issue P. Yam
  9. Synthetic Metals v.85 P. J. Kinlwn;D. C. Silverman;C. R. Jeffreys https://doi.org/10.1016/S0379-6779(97)80257-3
  10. Synthetic Metals v.110 Y. Haba;E. Segal;M. Nakris;G. I. Titelman;A. Siemann https://doi.org/10.1016/S0379-6779(99)00280-5
  11. Macromol. Res. v.10 S. H. Lee;J. W. Yoon;M. H. Suh https://doi.org/10.1007/BF03218319
  12. Synthetic Metals v.108 W. Yin;E. Ruckenstein https://doi.org/10.1016/S0379-6779(99)00179-4
  13. Synthetic Metals v.98 Y. Roichman;G. I. Titelmean;M. S. Silverstein;A. Siegmann;M. Nakris https://doi.org/10.1016/S0379-6779(98)00190-8
  14. Synthetic Metals v.28 T. Nakajima;T. Kawagoe
  15. Synthetic Metals v.48 Y. Cao;P. Smith;A. J. Hegger https://doi.org/10.1016/0379-6779(92)90053-L
  16. Polymer v.34 Y. Cao;P. Smith https://doi.org/10.1016/0032-3861(93)90381-J
  17. Synthetic Metals v.55-57 Y. Cao;P. Smith;A. J. Hegger
  18. Polymer v.12 N. Kuramoto;A. Tomita
  19. J. Appl. Polym. Sci. v.82 T. Jeevananda;A. Siddaramaiah;V. Annadurai;R. Somashekar https://doi.org/10.1002/app.1862
  20. Synthetic Metals v.107 K. S. Ho;K. H. Hsieh;S. K. Hugan;T. H. Hsieh https://doi.org/10.1016/S0379-6779(99)00144-7
  21. Synthetic Metals v.123 M. E. Leyva;G. M. O. Barra;B. G. Soares https://doi.org/10.1016/S0379-6779(01)00319-8
  22. Synthetic Metals v.123 G. Rupali;D. Amitabha;G. Gountam https://doi.org/10.1016/S0379-6779(00)00573-7
  23. J. Appl. Polym. Sci. v.86 J. E. Yang;J. S. Kong;S. W. Park;D. J. Lee;H. D. Kim https://doi.org/10.1002/app.11249
  24. Fibers and Polymers v.3 Y. S. Kwak;H. D. Kim https://doi.org/10.1007/BF02912660
  25. J. Appl. Polym. Sci. v.89 Y. S. Kwak;S. W. Park;Y. H. Lee;H. D. Kim https://doi.org/10.1002/app.12128
  26. J. Chem. Soc. Chem. Commun. Y. Sun;M. Diarmid, A. G.;A. J. Epstein
  27. Synthetic Metals v.61 J. Stejskal;P. Kratochvil https://doi.org/10.1016/0379-6779(93)91266-5
  28. Synthetic Metals v.130 B. C. Roy;M. D. Gupta;L. Bhoumik;J. K. Ray https://doi.org/10.1016/S0379-6779(02)00108-X
  29. Polymer v.38 S. A. Chen;G. W. Hwang https://doi.org/10.1016/S0032-3861(96)00880-4
  30. Synthetic Metals v.107 K. S. Ho;K. H. Hsieh;S. K. Hugan;T. H. Hsieh https://doi.org/10.1016/S0379-6779(99)00144-7
  31. Synthetic Metals v.47 Y. Wang;M. F. Rubner https://doi.org/10.1016/0379-6779(92)90366-Q
  32. Macromolecules v.26 H. S. O. Chan;S. C. Ng;W. S. Sim;S. H. Seow;K. L. Tan;B. T. G. Tan https://doi.org/10.1021/ma00053a022
  33. European Polymer Journal v.35 P. Ghosh;S. K. Siddhanta;A. Chakrabarti https://doi.org/10.1016/S0014-3057(98)00157-8
  34. Synthetic Metals v.104 L. Ding;X. Wang;R. V. Gregory https://doi.org/10.1016/S0379-6779(99)00035-1
  35. J. Polym. Sci. Polym. Chem. v.32 S. Palaniappan;B. H. Narayana https://doi.org/10.1002/pola.1994.080321304
  36. Polymer v.41 L. F. Malmonge;L. H. C. Mattoso https://doi.org/10.1016/S0032-3861(00)00182-8
  37. Polymer v.42 P. R. Somani;R. Marimuthu;A. B. Mandale https://doi.org/10.1016/S0032-3861(00)00670-4
  38. Synthetic Metals v.102 M. Omastova;I. Chodak;J. Pionteck https://doi.org/10.1016/S0379-6779(98)01453-2