초록
로켓모터의 성능을 확인하기 위해 지상에서 연소시험을 수행하여 추력, 압력, 온도. 그리고 변형률 등 필요한 데이터를 계측하지만 측정된 추력은 시험대 동특성으로 인해 실제 추력과는 달리 과도진동이 포함된 왜곡된 형태를 나타낼 수 있다. 이러한 경우에는 추력 최대치나 추력 상승시간 등 로켓모터의 성능을 결정하는 값들의 정확한 값을 얻지 못할 수 있다. 따라서 본 논문에서는 이러한 추력 왜곡 현상의 원인을 분석하고 그 문제점을 해결하기 위한 이론적인 방법을 제안한다. 또한 제안된 방법을 가상 시험대에 적용하여 제안한 방법의 적용 가능성을 확인하고, 차후 실험 데이터를 이용한 추력 추정의 기본적인 방향을 제시하고자 한다.
In general, static firing test is conducted before flight in order to obtain data such as thrust. pressure, temperature and strain, which show the characteristics of rocket motors. But the measured thrust of the obtained data is especially distorted by the effects of dynamic characteristics of thrust stand so that it is difficult for us to determine the exact value of peak thrust and rising time etc., which represent the performance of rocket motor. This paper, therefore. verified the causes of distortion of measured thrust, and proposed the theoretical method to estimate the true thrust from the distorted thrust. And also the proposed method was applied to virtual thrust stand using computer simulation, and showed good result. As a result of that, the proposed method was proven to be valid and applicable to estimate distorted thrust.