초록
본 연구에서는, 능동질량감쇠기가 설치된 3층 건물 축소 실험을 통해 유한요소모델에 기초한 시스템 식별기법의 유효성을 검증하였다. 입력 신호로는 능동질량감쇠기를 통해 구현되는 20개의 가우시안 백색잡음을 사용하였으며, 출력 신호로는 각층에 설치된 가속도계를 사용하여 측정된 각층 절대가속도를 사용하였다. 복소진동수응답함수를 구성한 후, 마코프(Markov) 파라메터와 시스템 행렬을 추출하였으며, 이로부터 CBSI기법을 이용하여 유한요소모델을 식별하였다. 식별된 유한요소모델과 실험을 통해 얻어진 복소응답함수는 매우 일치함을 확인할 수 있었다.
In this paper, an experimental verification of system identification technique for constructing finite element model is conducted for a three-story test structure equipped with an active mass driver (AMD). Twenty Gaussian white noises were used as the input for AMD, and the corresponding accelerations of each floor are measured. Then, the complex frequency response function (FRF) for the input, the force induced by the AMD, was obtained and subsequently, the Markov parameters and system matrices were estimated. The magnitudes as well as phase of experimentally obtained FRFs match well with those of analytically obtained FRFs.