References
- R. L. Williams,II, B. E. Carter, P. Gallina, G. Rosati, 'Dynamic model with slip for wheeled omnidirectional robots,' IEEE Transations on Robotics & Automation, vol. 18, no. 3, pp. 285-293, June 2002 https://doi.org/10.1109/TRA.2002.1019459
- Q. Huang, K. Yokoi, S. Kajita, K. Kaneko, H. Arai, N. Koyachi, K. Tanie, 'Planning Walking Patterns for a Biped Robot,' IEEE Transactions on Robotics & Automation, vol. 17, no. 3, pp. 280-289, June 2001 https://doi.org/10.1109/70.938385
- S. Hirose and K. Kato, 'Study on quadruped walking robot in tokyo institute of technology-past, present and future,' Proc. of the Conf. on Robotics & Automation, pp. 414-419, 2000
- M. Vim, D. G. Duff, K. D. Roufas, 'Walk on the wild side,' IEEE Robotics & Automation Magazine, pp. 49-53, December 2002
- B. Goodwine and J. Burdick, 'Gait controllability for legged robots,' Proc. of the Conf. on Robotics & Automation, pp. 484-489, 1998
- V. Hugel and P. Blazevic, 'Towards efficient implementation of quadruped gaits with duty factor of 0.75,' Proc. of the Conf. on Robotics & Automation, pp. 2360-2365, 1999
- F. B. Ouezdou, O. Bruneau, J. C. Guinot, 'Dynamic analysis tool for legged robots,' Multiboyd System Dynamics 2, pp.369-391, 1998 https://doi.org/10.1023/A:1009730206737
- 이지홍, 전봉환, '다족 보행로봇의 속도작업공간 해석,' 제어 . 자동화 . 시스템공학 논문지, vol. 8, no. 6, pp. 477-483, June, 2002 https://doi.org/10.5302/J.ICROS.2002.8.6.477
- J. Lee, 'A study on the manipulability measures for robot manipulators,' IEEE/RSJ IROS'97., pp.1458-1465, 1997
- G. M. Ziegler, Lectures on Polytopes, Springer-Verlag, 1995
- D. R. Chand and S. S. Kapur, 'An algoritlun for convex polytopes,' Journal of Association for Computing Machinery, vol. 17, no. 1, pp. 78-86, 1970 https://doi.org/10.1145/321556.321564
- F. T. Cheng, et. aI., 'Resolving manipulator redundancy under inequality constraints,' IEEE Trans. Robotics and Automation, vol. 10, no. 1, Fed., 1994
- A. Bicchi, C. Melchiorri, and D. Balluchi, 'On the mobility and manipulability of general multiple limb robots,' IEEE Trans. on Robotics and Automation, vol. 11, no. 2, pp. 215-228, 1995 https://doi.org/10.1109/70.370503
- J. S. Arora, 'Introduction to optimwn design,' McGraw-Hill, 1989
- B. bayle, J. Y. Fourquet, and M. Renaud, 'Manipulability analysis for mobile manipulators,' Froc. of the Conf. on Robotics & Automation, pp. 1251-1256, 2001
- T. Yoshikawa, 'Manipulability of robotic mechanisms,' JRobot, vol. 4, no.2, pp. 3-9, 1985 https://doi.org/10.1177/027836498500400201
- J. Lee, 'Velocity workspace analysis for multiple arm robots systems,' Robotica, vol. 19, pp. 581-591, 2001 https://doi.org/10.1017/S0263574700003179