References
- Shin, Y.J., Cho, J.D., Lee, E.S., 'Trends of soft lithography technology,' J. Kor. Soc. of Prec. Eng., Vol. 20, No. 4, pp. 5-11, 2003
- Chang, W.S., Shin, B.S., Whang, K.H., 'Nanoprobe application technologies,' J. of Korean Society of Pre. Eng., Vol. 20, No. 3, pp. 5-14, 2003
- Avouris, Ph., Hertel, T. and Martel, R., 'Atomic porce microscope tip-induced local oxidation of silicon: kinetics, mechanism, and nanofabrication,' Appl. Phys. Lett., Vol. 2, pp. 285-287, 1997 https://doi.org/10.1063/1.119521
- Campell, P.M., Snow, E.S., 'Proximal probe-based fabrication of Nanometer-scale devices,' Proc. SPIE Intl. Soc. Optical Engr., Vol. 3975, pp.943-948, 1999
- Miyake, S., Kim, J., 'Microprotuberance processing of silicon by diamond tip scanning,' Jpn. Prec. Eng., Vol. 65, No. 12, pp. 1788-1792, 1999 https://doi.org/10.2493/jjspe.65.1788
- Kim, J.D., Miyake, S., 'Nanometer scale protuberance and groove processing of silicon by mechnaochemical action and its application of etching mask,' Jpn. Prec. Eng., Vol. 68, No. 5, pp. 695-699, 2002 https://doi.org/10.2493/jjspe.68.695
- Ashida, K., Morita, N., Toshida, Y., 'Study on nanomachining process using mechanism of a friction force microscope,' JSME International Journal, Series C, Vol. 44, No. 1, pp. 244-260, 2001 https://doi.org/10.1299/jsmec.44.244
- Ashida, K., Chen, L., Morita, N., 'New maskless micro-fabrication technique of single-crystal silicon using the combination of nanometer-scale machining and wet etching,' Proc. of 2nd euspen Int. Conf., Turin, Italy, May, pp. 78-81, 2001
- Chen, L., Morita, N., Ashida, K., 'Maskless pattern formation which used alkaline etching and nanoscale cutting by using friction force microscope,' Jpn. Prec. Eng., Vol. 66, No. 11, pp. 23-27, 2000 https://doi.org/10.2493/jjspe.66.1807
- Shibata, T., Fuji, A., Makino,E., 'Crystallographic orientation dependence of slip deformation behavior in diamond-turned single-crystal silicon,' Jpn. Prec. Eng., Vol. 65, No. 9, pp. 1319-1324, 1999 https://doi.org/10.2493/jjspe.65.1319
- Ichida, Y., Frej, N.B., Yousefi, R., 'Ductile-mode mirror cutting of single-crystal silicon (1st report) - Effects of cutting speed on the brittle/ductile mode transition behavior in cutting process,' Jpn. Prec. Eng., Vol. 64, No. 4, pp. 608-612, 1998 https://doi.org/10.2493/jjspe.64.608
- Sumomogi, T., Nakamura, M., Endo, T., Goto, T., Kaji, S., 'Evaluation of surface and substrate cracks in nanoscale-machined single-crystal Si by scanning force microscope and scanning laser microscope,' Mater. Charact., Vol.48, pp.141-145, 2002 https://doi.org/10.1016/S1044-5803(02)00198-5
- Koshimizu, S., Otsuka, J., 'Microinentation tests of single crystal silicon - microdeformation behavior and measurement of ductile to brittle transition,' Jpn. Prec. Eng., Vol. 64, No. 11, pp. 1643-1647, 1998 https://doi.org/10.2493/jjspe.64.1643
- Lang, W., 'Silicon microstructuring technology,' Mater. Sci. & Eng., Vol. R17, pp.1-55, 1996 https://doi.org/10.1016/0927-796X(96)00190-8