References
- Hollwarth, B. R. and Dagan, L., 1980, 'Arrays of Impinging Jets with Spent Fluid Removal through Vent Holes on the Target Surface Part 1: Average Heat Transfer,' J. of Engineering for Power, Vol. 102, pp. 994-999 https://doi.org/10.1115/1.3230372
- Hollwarth, B. R. and Lehmann, G. and Rosiczkowski, J., 1983, 'Arrays of Impinging Jets with Spent Fluid Removal through Vent Holes on the Target Surface Part 2: Local Heat Transfer,' J. of Engineering for Power, Vol. 105, pp. 393-402 https://doi.org/10.1115/1.3227428
- Cho, H. H. and Goldstein, R. J., 1996, 'Effect of Hole Arrangements on Impingement/ Effusion Cooling,''Proceeding of the 3rd KSME-JSME Thermal Engineering Conference, pp. 71-76
- Cho, H. H. and Rhee, D. H., 2001, 'Local Heat/Mass Transfer Measurement on the Effusion Plate in Impingement/Effusion Cooling System,' J. of Turbomachinery, Vol. 123, pp. 601-608 https://doi.org/10.1115/1.1344904
- Cho, H. H., Choi, J. H. and Rhee, D. H. 2001, 'The Effects of Hole Arrangements on Heat/Mass Transfer of Impingement/Effusion Cooling System,' Proceedings of ExHFT-5, pp. 975-980
- Metzger, D. E. and Korstad, R. J., 1992, 'Effects of Cross flow in Impingement Heat Transfer,' J. of Engineering for Power, Vol. 94, pp. 35-41
- Florschuetz, L. W., Metzger, D. E. and Su, C. C., 1984, 'Heat Transfer Characteristics for Jet Array Impingement With Initial Crossflow,''J. of Heat Transfer, Vol. 106, pp. 34-41 https://doi.org/10.1115/1.3246656
- ASME Paper No.99-GT-256 3-D Numerical Simulation of Impinging Jet Cooling with Initial Crossflow Haiping,C.;Wanbing,C.;Taiping,H.
- Haiping, C., Wanbing, C. and Taiping, H., 1999, '3-D Numerical Simulation of Impinging Jet Cooling with Initial Crossflow,' ASME Paper No. 99-GT-256
- Yoon, P. H., Rhee, D. H. and Cho, H. H., 2000, 'Effect of Arrays of Impinging Jets with Crossflow on Heat/Mass Transfer,' Trans of KSME (B), Vol. 24, No. 2, pp. 195-203
- Yoon, P. H., Rhee, D. H. and Cho, H. H., 2001, 'Flow and Heat/Mass Transfer Characteristics of Arrays of Impingement Jets with Effusion Holes,' Trans of KSME (B), Vol. 25, No. 11, pp. 1606-1615
- Rhee, D. H., Choi, J. H. and Cho, H. H., 2002, 'Flow and Heat (Mass) Transfer Characteristics in an Impingement/Effusion Cooling System with Crossflow,' J. of Turbomachinery, Vol. 125, pp. 74-82 https://doi.org/10.1115/1.1519835
- Chung, Y. S., Lee, D. H. and Lee, J. S., 1998, 'Heat Transfer Coefficient Measurement by a Jet Impinging on a Rib-Roughened Convex Surface,' Trans of KSME (B), Vol. 22, No. 3, pp. 373-385
- Lee, D. H., Won, S. Y. and Lee, J. S., 1999, 'Heat Transfer Measurement by a Round Jet Impinging on a Rib-Roughened Concave Surface,' Trans of KSME (B), Vol. 23, No. 6, pp. 734-743
- Haiping, C., Dalin, Z., Dong, H. and Taiping, H., 1996, 'Experimental investigation on Impingement Heat Transfer from Rib roughened surface within Arrays of circular jet: Effect of Geometric Parameters,' ASME Paper No. 98-GT-208
- Gau, C. and Lee, C. C., 1992, 'Impingement Cooling Flow Structure and Heat Transfer Along Rib-Roughened Walls,' Int. J. of Heat Mass Transfer, Vol. 35, pp. 3009-3020 https://doi.org/10.1016/0017-9310(92)90320-R
- Cho, H. H. and Goldstein, R. J., 1995, 'Heat (Mass) Transfer and Film Cooling Effectiveness with Injection through Discrete Holes Part I: within holes and on the back surface,' J. of Turbomachinery, Vol. 117, pp. 440-450 https://doi.org/10.1115/1.2835680
- Cho, H. H., Wu, S. J., and Kwon, H. J., 2000, 'Local Heat/Mass Transfer Measurements in a Rectangular Duct with Discrete Ribs,' J. of Turbomachinery, Vol. 122, pp. 579-586 https://doi.org/10.1115/1.1303049
- Han, J. C., Chandra, P. R. and Lau, S. C., 1988, 'Local Heat/Mass Transfer Distributions Around Sharp 180 Deg Turns in Two-Pass Smooth and Rib-Roughened Channels,' J. Heat Transfer, Vol. 110, pp. 91-98 https://doi.org/10.1115/1.3250478
- Chandra, P. R., Han, J. C. and Lau, S. C., 1988, 'Effect of Rib Angle on Local Heat /Mass Transfer Distribution in a Two-Pass Rib- Roughened Channel,' J. of Turbomachinery, Vol. 110, pp. 233-241 https://doi.org/10.1115/1.3262186
- Ekkad, S. V. and Han, J. C., 1997, 'Detailed Heat Transfer Distribution in Two-pass Square Channels with Rib Turbulators,' Int. J. of Heat Mass Transfer, Vol. 40, No. 11, pp. 2525-2537 https://doi.org/10.1016/S0017-9310(96)00318-3
- Taslim, M. E. and Spring, S. D., 1994, 'Effects of Turbulator Profile and Spacing on Heat Transfer and Friction in a Channel,' J. of Thermophysics and Heat Transfer, Vol. 8, No. 3, pp. 555-562 https://doi.org/10.2514/3.578
- Liou, T. M. and Hwang, J. J., 1993, 'Effect of Ridge Shapes on Turbulent Heat Transfer and Friction in a Ractangular Channel,' Int. J. of Heat Mass Transfer, Vol. 36, No. 4, pp. 931-940 https://doi.org/10.1016/S0017-9310(05)80277-7
- Goldstein, R. J. and Cho, H. H., 1995, 'A Review of Mass Transfer Measurement Using Naphthalene Sublimation,''Exp. Thermal and Fluid Science, Vol. 10, pp. 416-434 https://doi.org/10.1016/0894-1777(94)00071-F
- Eckert, E. R. G., 1976, 'Analogies to Heat Transfer Processes, in Measurements in Heat Transfer,' ed. Eckert, E. R. G. and Goldstein, R. J., Hemisphere Pub., New York, pp. 397-423
- Kline, S. J., and McClintock, F. A., 1953, 'Describing Uncertainty in Single-Sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8
- Choi, C. C., Rhee D. H. and Cho H. H., 2002, 'Heat/Mass Transfer and Pressure Drop in A Square Duct with V-Shaped Ribs,' Trans of KSME (B), Vol. 26, No. 11, pp. 1542-1551 https://doi.org/10.3795/KSME-B.2002.26.11.1542