References
- Plast. Eng. v.40 Optics with plastics:an alternative to glass Anonymous
- Molding Processes in Handbook of Industrial Automation A.I.Isayev;R.L.Shell(ed.);E.L.Hall(ed.)
- Kunststoffe v.77 Manufacturing Optical Lens by Injection Compression Molding G.Klepek
- Advances in Polymer Technology v.17 Experimental Study of Injection-Charged Compression Molding of Thermoplastic S.Y.Yang;Y.C.Chen https://doi.org/10.1002/(SICI)1098-2329(199824)17:4<353::AID-ADV6>3.0.CO;2-Q
- Macromol. Mater. Eng. v.284/285 Optimization of the optical quality of polymer glasses in the injection compression molding press W.Michaeli;M.Wielpuetz https://doi.org/10.1002/1439-2054(20001201)284:1<8::AID-MAME8>3.3.CO;2-T
- Rheol. Acta. v.19 Toward a Viscoelastic Modeling of the Injection Molding of Polymers A.I.Isayev;C.A.Hieber https://doi.org/10.1007/BF01521928
- Rubber Chemistry and Technology v.59 Viscoelastic Effect in Compression Molding of Elastomers:Shear-Free Squeezing Flow A.I.Isayev;A.D.Azari
- Polym. Eng. Sci. v.42 Numerical Prediction of Residual Stresses and Birefringence in Injection/Compression Molded Center-Gated Disk: Par 1. Basic Modeling and Results for Injection Y.B.Lee;T.H.Kwon;K,Yoon https://doi.org/10.1002/pen.11114
- Polym. Eng. Sci. v.42 Numerical Prediction of Residual Stresses and Birefringence in Injection/Compression Molded Center-Gated Disk: Part 2. Effect of Processing Conditions Y.B.Lee;T.H.Kwon;K.Yoon https://doi.org/10.1002/pen.11115
- Int. Comm. Heat Mass Transfer v.25 Simulation of Injection-Compression Mold-Filling Process S.C.Chen;Y.C.Chen;H.S.Peng https://doi.org/10.1016/S0735-1933(98)00082-7
- Journal of Applied Polymer Science v.75 Simulation of Injection-Compression-Molding Process. 2.,Influence of Process Characteristics in Part Shrinkage S.C.Chen;Y.C.Chen;H.S.Peng https://doi.org/10.1002/(SICI)1097-4628(20000328)75:13<1640::AID-APP10>3.0.CO;2-L
- Advance in Polymer Technology v.21 Simulation of Injection-compression-Molding Process, Part 3: Effect of Process Conditions on Part Birefringence S.C.Chen;Y.C.Chen;H.S.Peng https://doi.org/10.1002/adv.10024
- Korea-Australia Rheology Journal v.15 no.4 Numerical Simulation of Flow-Induced Birefringence Injection Molde Disk G.D.Shyu;A.I.Isayev;H.S.Lee
- Korean J. of Rheol v.7 An Experimental Study on Precision Injection Molding of Center-gated Disks K.Yoon