References
- Korean Journal of Air-Conditioning and Refrigeration Engineering v.14 no.9 Two-phase flow characteristics of refrigerant in T-branch with horizontal and vertical inlet tube Tae,S.J.;Cho,K.
- Korean Jouranl of Air-Conditioning and Refrigeration Engineering v.15 no.10 Effects of the temperature glide and superheat of R407C on the performance of evaporator Kim,C.D.;Jeon,C.D.;Lee,J.
- Refrigeration-Air Conditioning Engineering v.12 no.1 Two phase flow distibution in multi-parallel evaporator tubes (1st report: Non-heating mode) Kim,J.S.
- Korean Journal of Air-Conditioning and Refrigeration Engineering v.11 no.5 Characteristics two-phase flow distibution and pressure drop in a horizontal T-type evaporator tube Park,J.H.;Cho,K.;Cho,H.G.
- NISTIR 89-4133 EVSIM-An Evaporator Simulation Model Accounting for Refrigerant and One Dimensional Air Distribution Domanski,P.A.
- Proceedings of the SAREK '98 Summer Annual Conference Analytical model of dry surface cross-flow fin-tube heat exchanger by tube-by-tube method Youn,B.;Park,H.Y.;Kim,C.H.
- International Journal of Refrigeration v.26 An improved method for analyzing a fin and tube evaporator containing a zeotropic mixture refrigerant with air mai-distribution Lee,J.H.;Kwon,Y.C.;Kim,M.H. https://doi.org/10.1016/S0140-7007(03)00023-9
- Korean Jouranl of Air-Conditioning and Refrigeration Engineering v.15 no.3 Evaluation of air-side heat transfer and friction characteristics on design conditions of condenser Kim,C.D.;Jeon,C.D.;Lee,J.
- Fundamental Handbook (SI) ASHRAE
- Thermodynamic and transport properties of refrigerants and refrigerant mixtures databases (REFPROP), Ver. 6.01 McLinden,M.O.;Klein,S.A.;Lemmon,E.W.;Peskin,A.P.
- International Journal of Heat and Mass Transfer v.19 no.3 A general correlation for flow boiling in tubes and annuli Gungor,K.E.;Winterton,R.H.S.
- International Journal of Heat and Fluid Flow v.17 Single-phase heat transfer and flow friction correlation for micro fin tubes Wang,C.C.;Chiou,C.C.;Lu,D.C. https://doi.org/10.1016/0142-727X(96)00048-3
- ASHRAE Transaction v.96 Performance predictions of refrigerant oil mixtures in smooth and internally finned tube, Ⅱ, design equations Schlager,L.M.;Pate,M.B.;Bergles,A.E.
- Proc., 30th National Symposia of Japan Condensation heat transfer of refrigerants HFC134a, HCFC123 and HCFC22 in horizontal smooth tube and a horizontal microfin tube Haraguchi,H.;Koyama,S.;Esaki,J.;Fujii,T.
- Heat Transfer Engineering v.4 Heat transfer performance of internally finned tube Carnavos,T.C.
- ASHRAE Transactions v.2342 Return bend pressure drop in refrigeration system Geary,F.D.
- Transaction of ASME v.3 Pressure loses in smooth pipe bends, Basic Engineering Ito,H.
- International Journal of Refrigeration v.12 Heat transfer and pressure drop during evaporation and condensation of R-22 in horizontal micro-fin tubes Schlager,L.M.;Pate,M.B.;Bergles,A.E.
- International Journal of Refrigeration v.22 An investigation of the airside performance of the slit fin-and-tube heat exchangers Wang,C.C.;Tao,W.H.;Chang,C.J. https://doi.org/10.1016/S0140-7007(99)00031-6
- Heating, Ventilating, and Air Conditioning Analysis and Design McQuiston,F.C.;Parker,J.D.
- SHASE Transactions (The Society of Heating, Air-conditioning and Sanitary Engineers of Japan) v.44 Natio,N.
- Tae, S.J. and Cho, K., 2002, Two-phase flow characteristics of refrigerant in Tbranch with horizontal and vertical inlet tube, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 14, No.9, pp.741-748