Influence of Silane Coupling Agents on the Interlaminar and Thermal Properties of Woven Glass Fabric/Nylon 6 Composites

  • Donghwan Cho (Department of Polymer Science and Engineering, Kumoh National Institute of Technology) ;
  • Yun, Suk-Hyang (Department of Polymer Science and Engineering, Kumoh National Institute of Technology) ;
  • Kim, Junkyung (Polymer Hybrid Research Center, Korea Institute of Science and Technology) ;
  • Soonho Lim (Polymer Hybrid Research Center) ;
  • Park, Min ( Korea Institute of Science and Technology) ;
  • Lee, Sang-Soo (Polymer Hybrid Research Center) ;
  • Lee, Geon--Woong ( Korea Institute of Science and Technology)
  • Published : 2004.02.01

Abstract

In this study, the influence of silane coupling agents, featuring different organo-functional groups on the interlaminar and thermal properties of woven glass fabric-reinforced nylon 6 composites, has been by means of short-beam shear tests, dynamic mechanical analysis, scanning electron microscopy, and thermogravimetric analysis. The results indicate that the fiber-matrix interfacial characteristics obtained using the different analytical methods agree well with each other. The interlaminar shear strengths (ILSS) of glass fabric/nylon 6 composites sized with various silane coupling agents are significantly improved in comparison with that of the composite sized commercially. ILSS of the composites increases in the order: Z-6076 with chloropropyl groups in the silanes > Z-6030 with methacrylate groups> Z-6020 with diamine groups; this trend is similar to that of results found in an earlier study of interfacial shear strength. The dynamic mechanical properties, the fracture surface observations, and the thermal stability also support the interfacial results. The improvement of the interfacial properties may be ascribed to the different chemical reactivities of the reactive amino end groups of nylon 6 and the organo-functional groups located at the ends of the silane chains, which results from the increased chemical reactivity in order chloropropyl > methacrylate > diamine.

Keywords

References

  1. SAMPE J. L.T.Drzal
  2. Engineered Interfaces in Fiber-Reinforced Composites J.K.Kim;Y.W.Ma
  3. Composites Part A v.32 J.L.Thomason;L.J.Adzima https://doi.org/10.1016/S1359-835X(00)00124-X
  4. J. Adhesion v.76 J.E.Ritter;J.C.Learned;G.S.Jacome;T.P.Russel;T.J.Lardner https://doi.org/10.1080/00218460108030725
  5. Silane Coupling Agents E.P.Plueddemann
  6. Composites v.25 B.K.Larson;L.T.Drzal https://doi.org/10.1016/0010-4361(94)90206-2
  7. Handbook of Composites D.J.Vaughan;S.T.Peters(ed.)
  8. Polym. Comp. v.14 H.Al-Moussawi;E.K.Drawn;L.T.Drzal https://doi.org/10.1002/pc.750140304
  9. Polymer v.43 D.M.Laura;H.Keskkula;J.W.Barlow;D.R.Paul https://doi.org/10.1016/S0032-3861(02)00302-6
  10. Composites v.23 P.J.Herrera-Franco;L.T.Drzal https://doi.org/10.1016/0010-4361(92)90282-Y
  11. Comprehensive Composite Materials v.5 L.T.Drzal;P.J.Herrera-Franco
  12. J. Mater. Sci. Lett. v.22 S.H.Yun;D.Cho;J.Kim;S.Lim;G.W.Lee;M.Park;S.S.Lee https://doi.org/10.1023/A:1026384408153
  13. J. Adhesion v.79 D.Cho;Y.Choi;L.T.Drzal https://doi.org/10.1080/00218460309559
  14. Comp. Sci. Tech. v.61 M.L.Costa;S.F.M.de Almeida;M.C.Rezende https://doi.org/10.1016/S0266-3538(01)00157-9
  15. Ph.D. Dissertation, Michigan State University The Improvement of the Hydrothermal and Mechanical Properties of Bismaleimide and K3B/IM7 Carbon Fiber Composites Through a Systematic Study of the Interphase M.S.Wilenski
  16. Composites Part A v.29A A.Pegorett;M.Fidanza;C.Migliaresi;A.T.DiBennedetto
  17. Polym. Comp. v.11 J.L.Thomason https://doi.org/10.1002/pc.750110206
  18. Polym. Comp. v.23 I.Fisher;A.Siegmann;M.Narkis https://doi.org/10.1002/pc.10448
  19. MS Thesis, Kumoh National University of Technology Dynamic Mechanical Properties of LaRC PETI-5 Polyimide, the Blends and the Composites Y.Choi
  20. Mechanical Properties of Polymer and Composites L.E.Neilson
  21. SAMPE Quart. v.18 P.S.Chua