Abstract
In this paper, a method is presented for the design of an orthomode transducer(OMT) operating at 21/31GHz frequency bands. A square waveguide is used in the common port while the WR-34 standard rectangular waveguide is used in the straight port. The straight port is connected to the common port via a multi-stage quarter-wave impedance transformer. The side port is coupled to the common port through a slot formed along the center line of the common square waveguide. An impedance transformer is employed to match the impedance of the coupling slot with that of the WR-51 waveguide at the output of the side port. Dimensions of the OMT are iteratively optimized employing the theory of waveguide. The validity of the proposed method is verified by fabricating and testing the designed orthomode transducer.
본 논문에서는 21/31 GHz 대역 직교모드변환기의 설계 기법을 제시하였다. 공용포트에는 8.38${\times}$8.38 mm의 정사각형 도파관을 사용하였으며 직선포트에는 WR-34표준 사각형 도파관을 사용하였다. 직선포트는 다단 λ/4 임피던스변환기로 공용포트에 연결하였다. 측면포트는 공용도파관 중심선 상의 슬롯에 의해 공용포트와 결합되며 슬롯과 측면포트의 WR-51 표준 사각형 도파관 사이에 임피던스 정합구조를 사용하였다. 위와 같은 구조의 직교모드변환기를 도파관 이론에 기초한 반복설계에 의해 최적화하였다. 설계된 직교모드변환기를 제작, 측정하여 설계기법의 타당성을 확인하였다.