Modeling and Experimental Response Characterization of the Chevron-type Bi-stable Micromachined Actuator

Chevron형 bi-stable MEMS 구동기의 모델링 및 실험적 응답특성 분석

  • 황일한 (광주과학기술원 기전공학과) ;
  • 심유석 (광주과학기술원 기전공학과) ;
  • 이종현 (광주과학기술원 기전공학과)
  • Published : 2004.02.01

Abstract

Compliant bi-stable mechanism allows two stable states within its operation range staying at one of the local minimum states of the potential energy. Energy storage characteristics of the bi-stable mechanism offer two distinct and repeatable stable states, which require no power input to maintain it at each stable state. This paper suggests an equivalent model of the chevron-type bi-stable microactuator using the equivalent spring stiffness in the rectilinear and the rotational directions. From this model the range of spring stiffness where the bi-stable mechanism can be operated is analyzed and compared with the results of the FEA (Finite Element Analysis) using ANSYS for the buckling analysis, both of which show a good agreement. Based on the analysis, a newly designed chevron-type bi-stable MEMS actuator using hinges is suggested for the latch-up operation. It is found that the experimental response characteristics of around 36V for the bi-stable actuation for the 60$mu extrm{m}$ stroke correspond very well to the results of the equivalent model analysis after the change in cross-sectional area by the fabrication process is taken into account. Together with the resonance frequency experiment where 1760Hz is measured, it is shown that the chevron-type bi-stable MEMS actuator using hinges is applicable to the optical switch as an actuator.

Keywords

References

  1. Jensen, B. D. et al., 'Design optimization of a fully-compliant bi-stable micro-mechanism,' Proc. ASEM Int. Mech. Eng. Congress and Exposition, pp. 1-7, 2001
  2. Lee, J. H. et al., 'Bi-stabel planar polysilicon microactuators with shallow arch-shaped leaf springs,' Proc. SPIE, vol. 3876, Micromachined Device, pp. 274-279 https://doi.org/10.1117/12.360505
  3. Noell, W. et al., 'Hybrid 4X4 optical cross connector based on MEMS switches and integrated optical waveguides,' Optical MEMS 2001, pp. 13-14, 2001
  4. Jin, Q. et al., 'A high-current electrothermal bistable MEMS relay,' IEEE MEMS conference, pp. 64-67, 2003
  5. Han, J.S. en al., 'Parametric study and optimization of a micro-optical switch with a laterally driven electromagnetic microactuator,' J, Micromech. Microeng., Vol. 12, pp. 939-947 https://doi.org/10.1088/0960-1317/12/6/326
  6. Howell, L. L. 'Compliant Mechanisms,' John Wiley & Sons, Inc., New York, 2001
  7. Opdahl, P. G. et al., 'An investigation into compliant bi-stable mechanisms,' Proc. DETC'98, Sep., MECh-5914, 1998
  8. Chen, J. S. et al, 'Effect of Process Parameters on the Surface Morhology and Mechanical Performance of Silicon Structures After Deep Reactive Ion Etching(DRIE),' J. MEMS, Vol. 11, No. 3, pp. 264-275, 2002 https://doi.org/10.1109/JMEMS.2002.1007405