참고문헌
- Kobayashi, S., Oh, S. I., Altan, T., 'Metal Forming and the Finite-Element Method ,' New York, Oxford University Press, 1989
- Zienkiewicz, O. C., 'The Finite Element Method,' 4th Ed. McGraw-Hill, New York, 1977
- Avizur, B., 'Handbook of Metal Forming Processes,' Wiley, New York, 1983
- Balendra, R., and Qin,Y., 'Material-flow Considerations for the Design of Injection Forging,' int. J. Manufacturing Science and Engineering, 1997, Vol. 119, pp. 350-357, 1997 https://doi.org/10.1115/1.2831113
- Balendra, R., Qin, Y., 'FE Simulation of the Development of Flaws During Injection Forging,' Int. J. Tools Manufact. Vol. 34, pp.1091-1101, 1994 https://doi.org/10.1016/0890-6955(94)90015-9
- Balendra, R., 'Injection-Chamber to Die-Cavity Interface for Injection Forming,' Int. J. Tools Manufact. Vol. 33, No.6, pp. 753-760, 1993 https://doi.org/10.1016/0890-6955(93)90035-S
- Colla, D., Patersen, S. B., Balendra, R., and Martins, P. A. F., 'Injection Forging of Industrial Components from Thick-Walled Tubes,' int.J. Manufacturing Science and Engineering, Vol. 119, pp. 537-541, 1997 https://doi.org/10.1115/1.2831184
- Balendra, R., Patersen, S. B., and Colla, D., 'Preforming Considerations for the Injection Forging of Tubes,' 11th, Int. Conf. Computer-Aided Prod. Eng. U. K., 1995
- Arentoft, M., Patersen, S. B., Rodrigues, J. M. C., Martins, P. A. F., Balendra, R., and Wanheim, T., 'Review of Research into the Injection Forging of Tubular Materals,' J. Mat. Proc. Tech. Vol. 52, pp.460 https://doi.org/10.1016/0924-0136(94)01619-C
- Bae, S. W., Kim.Y. J., 'Rigid-Plastic Finite Element Analysis for Extrusion-Forging Process Design of a Hollow Flange-Shaped Part,' Proceedings of ISIM2000, Oct. 4-7, pp. 449-452
- Son, K. H., Kim Y. H., Suh Y.S., 'A Study on the Defect of T type Forging Products,' Proceedings of KSPE, pp.952-956, 1997
- Kiuchi, M., Chung, H.K. & Yanagimoto, J. 'Analysis of Upsetting of Hollow Billets with Square and Gear-Type Dies,' J. JSTP, Vol.31, pp.907-912, 1990
- Cho, H. Y., Choi, J. U., Min, K. S., 'Study on the Forging of Splines with Hollow and Solid Billets,' J. KSPE, Vol. 13, No.1, pp.108-115, 1996
- Park, C., Choi, H. J., Hwang, B. B., 'A Process Sequence Design of the Multi-Step Cold Extrusion using Thick-Wall Pipes,' J. KSTP, Vol. 5, No. 3, pp.219-231, 1996
- Lee, C. H., and Altan,T., 'Influence of Flow Stress and Friction Upon Metal Flow in Upset Forging of Rings and Cylinders,' ASME J. Eng. Ind., pp. 775-782, 1972
- Rao, K. P., and Sivaram, K., 'A Review of Ring-Compression Testing and Applicability of the Calibration Curves,' J. Mater. Process. Technol., Vol. 37, pp.295-318, 1993 https://doi.org/10.1016/0924-0136(93)90098-Q
- Lin, Y. T., and Wang, J. P., 'An Investigation into the constant Friction Factor with the Upper-Bound Flow Function Elemental Technique,' J. Mater. Process. Technol., Vol.36, pp.57-68, 1992 https://doi.org/10.1016/0924-0136(92)90238-N