Stability Evaluation of In-Line Measurement System with Repeated Measurements

반복 측정이 가능한 인라인 측정시스템의 안정성 평가

  • Joung, Sooho (Department of Industrial and Systems Engineering and Research Center for Aircraft Parts Technology, Gyeongsang National University) ;
  • Byun, Jai-Hyun (Department of Industrial and Systems Engineering and Research Center for Aircraft Parts Technology, Gyeongsang National University)
  • 정수호 (경상대학교 산업시스템공학부 항공기부품기술연구센터) ;
  • 변재현 (경상대학교 산업시스템공학부 항공기부품기술연구센터)
  • Published : 2004.03.31

Abstract

In-line measurement systems are preferred to those in analytical laboratories, since in-line systems provide rapid response to process upsets. If an in-line measurement system exhibits an unstable variation and if this instability in measurement variation goes undetected, it will make the process monitoring procedure invalid. This paper presents a stability evaluation procedure for the in-line measurement system using two independent readings from the in-line measurement system and one reading from the analytical laboratory, which requires less measurement cost and time.

Keywords

References

  1. Bai, D, S., et al. (1996), Statistical Quality Control, second ed. Yeongi Moonhwasa
  2. Grubbs, F, E. (1948), On Estimating Precision of Measuring Instruments and Product Variability, J. Am, Statist. Assoc., 48, 243-264
  3. Hahn, G. J. and Nelson, W. (1970), A Problem in the Statistical Comparison of Measuring Devices, Technometrics, 12(1),95-102 https://doi.org/10.2307/1267354
  4. Lee, S. H.(2001), MINITAB Measurement System Analysis, Eretec
  5. Leitnaker, M. G. (2000), Comparing Measurement Processes: In-line Versus Analytical Measurements, Quality Engineering, 13(2), 293-298 https://doi.org/10.1080/08982110108918652
  6. Steiner, S. H. (2000), Statistical Process Control Using Two Measurement Systems, Technometrics, 42(2), 178-187 https://doi.org/10.2307/1271450