초록
이 연구에서는 FEM 해석을 통하여 파형강판 이음부의 강도 및 응력분포 특성에 관한 축방향 겹침길이 및 볼트간격의 영향 등을 검토하였다. 파형강판의 항복강도비($P/P_y$) 및 항복 후의 강도상승률은 축방향 겹침길이가 30mm일 때 가장 유리하게 되며, 현행의 제작기준에 의한 겹침길이는 매우 안전측의 값이 된다. 또한 파형강판 이음부의 강도특성은 볼트배치 방법에 따라 차이가 있는 것으로 나타났다. 즉, 볼트가 지그재그로 배치되어있는 표준형의 경우에는 주로 원둘레방향의 연단거리만이 강도에 영향을 미치게 되며, 볼트가 일렬로 배치되어있는 대골형의 경우에는 원둘레방향 연단거리와 볼트중심간격 모두 강도특성에 영향을 미치게 된다. 이 연구에서는 이상의 해석결과로부터 구한 강도특성 및 응력분포특성을 기초로 하여 현행의 파형강판 이음부 제작기준에 대한 타당성을 검토하였다.
This paper presents the numerical results in strength and stress distribution behavior for the connections of corrugated steel plates (CSP). The results obtained using the finite element method indicate that the CSP with =30mm of longitudinal edge lap, by the current standard specification, has very conservative values. The results also indicate the difference of strength behavior from the bolt arrangement. The strength behavior of standard corrugated type with staggered holes is only affected by circumferential edge lap, but the edge lap and bolthole spacing have an effect on the strength behavior for the deeply corrugated type with parallel holes. Based on these results, this paper examines the current specification of the connections for CSP.