참고문헌
- Lakshminarayana, B., Davino, R. and Pouagare, M., 1982, 'Three-Dimensional Flowfield in the Tip Region of a Compressor Rotor Passage-Part II: Turbulence Properties,' ASME J. Eng. Power, Vol. 104, pp. 772-781 https://doi.org/10.1115/1.3227343
- Moore, J., Shaffer, D. M. and Moore, J. G., 1987, 'Reynolds Stresses and Dissipation Mechanisms Downstream of a Turbine Cascade,' ASME J. Turbomachinery, Vol. 109, pp. 258-267 https://doi.org/10.1115/1.3262096
- Ristic, D., Lakshminarayana, B. and Chu, S., 1999, 'Three-Dimensional Flowfield Downstream of an Axial-Flow Turbine Rotor,' J. Propulsion Power, Vol. 15, pp. 334-344 https://doi.org/10.2514/2.5431
- Lee, G. H. and Baek, J. H., 2003, 'Performance Assessment of Turbulence Models for the Prediction of Tip Leakage Flow in an Axial-Flow Turbomachinery,' Trans. of the KSME(B), Vol. 27, No. 12, pp. 1655-1666 https://doi.org/10.3795/KSME-B.2003.27.12.1655
- Kang, S. and Hirsch, C., 1996, 'Numerical Simulation of Three-Dimensional Viscous Flow in a Linear Compressor Cascade with Tip Clearance,' ASME J. Turbomachinery, Vol. 118, pp. 492-505 https://doi.org/10.1115/1.2836694
- FLUENT, 2001, User's Guide Ver.6, FLUENT Inc.
- B. E. Launder, G. J. Reece, and W. Rodi, 'Progress in the development of a Reynolds stress turbulence model,' J. of Fluid Mech., 68,537-566 (1975) https://doi.org/10.1017/S0022112075001814
- Medic, G. and Durbin, P. A., 2002, 'Toward Improved Prediction of Heat Transfer on Turbine Blades,' ASME J. Turbomachinery, Vol. 124, pp. 187-192 https://doi.org/10.1115/1.1458020
- Basson, A. H. and Lakshrninarayana, B., 1995, 'Numerical Simulation of Tip Clearance Effects in Turbomachinery,' ASME J. Turbomachinery, Vol. 117, pp. 348-359 https://doi.org/10.1115/1.2835668
- Van Zante, D. E., Strazisar, A. J., Wood, J. R., Hathaway, T. H. and Okiishi, T. H., 2000, 'Recommendations for Achieving Numerical Simulation of Tip Clearance Flows in Transonic Compressor Rotor,' ASME J. Turbomachinery, Vol. 122, pp. 733-742 https://doi.org/10.1115/1.1314609
- Storer, J. A. and Cumpsty, N. A., 1991, 'Tip Leakage Flow in Axial Compressors,' ASME J. Turbomachinery, Vol. 113, pp. 252-259 https://doi.org/10.1115/1.2929095
- Gupta, A., Khalid, S. A., McNulty, G S. and Dailey, L., 2003, 'Prediction of Low Speed Compressor Rotor Flowfields with Large Tip Clearances,' ASME GT-2003-38637
- ICEM-CFD, 2002, User's Guide Ver.4.2, ICEM CFD Engineering
- Chen, H. C. and Patel, V. C., 1988, 'Near-Wall Turbulence Models for Complex Flows Including Separation,' AIAA J., Vol. 26, pp. 641-648 https://doi.org/10.2514/3.9948
- Lakshminarayana, B., 1996, Fluid Dynamics and Heat Transfer of Turbomachinery, John Wiley & Sons Inc.
- Inoue, M., Furukawa, M., Saiki, K. and Yamada, K., 1998, 'Physical Explanations of Tip Leakage Flow Field in An Axial Compressor Rotor,' ASME 98-GT-91
- Moore, J. G, Schorn, S. A. and Moore, J., 1996, 'Methods of Classical Mechanics Applied to Turbulence Stresses in a Tip Leakage Vortex,' ASME J. Turbomachinery, Vol. 118, pp. 622-629 https://doi.org/10.1115/1.2840917
- Moore, J. G and Moore, J., 1999, 'Realizability in Turbulence Modeling for Turbomachinery CFD,' ASME 99-GT-24
- Hinze, J. O., 1975, Turbulence, 2nd edition, McGraw-Hill