대한소아치과학회지 (Journal of the korean academy of Pediatric Dentistry)
- 제31권3호
- /
- Pages.391-399
- /
- 2004
- /
- 1226-8496(pISSN)
- /
- 2288-3819(eISSN)
광중합기에 따른 복합레진 중합시 온도 변화와 미세경도에 관한 연구
THERMAL CHANGE AND MICROHARDNESS IN CURING COMPOSITE RESIN ACCORDING TO VARIOUS CURING LIGHT SYSTEM
- 이동진 (원광대학교 치과대학 소아치과학교실.원광치의학연구소) ;
- 김대업 (원광대학교 치과대학 소아치과학교실.원광치의학연구소) ;
- 양영숙 (원광대학교 치과대학 소아치과학교실.원광치의학연구소) ;
- 이광희 (원광대학교 치과대학 소아치과학교실.원광치의학연구소)
- Lee, Dong-Jin (Department of Pediatric Dentistry, College of Dentistry, Wonkwang Dental Research Institute, Wonkwang University) ;
- Kim, Dae-Eop (Department of Pediatric Dentistry, College of Dentistry, Wonkwang Dental Research Institute, Wonkwang University) ;
- Yang, Yong-Sook (Department of Pediatric Dentistry, College of Dentistry, Wonkwang Dental Research Institute, Wonkwang University) ;
- Lee, Kwang-Hee (Department of Pediatric Dentistry, College of Dentistry, Wonkwang Dental Research Institute, Wonkwang University)
- 발행 : 2004.08.31
초록
현재 복합레진의 중합에 사용되는 광원으로 할로겐광 중합기, 플라즈마 아크 중합기, 레이저, LED 등이 사용되고 있으나 광조사에 따른 온도 증가와 중합 깊이 등이 수복치과학의 오랜 관심이었다. 본 연구의 목적은 광원에 따라 얼마나 온도 증가가 일어나는지, 그리고 중합 깊이에 따른 표면경도를 측정함으로써 전통적인 할로겐광 중합기에 대해 새로 개발된 중합기의 중합능력을 비교 평가하는 것이다. 기존의 할로겐광 중합기(Optilux 360)에 대해 최근 시판되는 플라즈마 아크 중합기(Flipo), 열 발생을 감소시킨 플라즈마 아크 중합기(Aurys), LED(Starlight), 그리고 중합시간을 감소시킨 고강도 LED(Freelight 2) 등을 광원으로 사용하였다. 우선 상온
The purpose of this study was to compare curing efficiency of newly developed curing units to traditional halogen curing unit by measuring thermal change and surface microhardness according to curing light system. Materials and mathods : The types of curing units were traditional low intensity halogen light(Optilux 360), plasma arc light(Flipo), low heat plasma arc light(Aurys), low intensity LED(Starlight), and high intensity LED(Freelight2). Temperature at the tip of light guide was measured by a digital thermometer using K-type thermocouple. And after resin was filled to 2, 3, 4mm teflon mold, bottom temperature measured during curing. After 24 hours, microhardness of top surface and bottom surface of each resin specimen were measured. Results : The result of this study can be summarized as follows, 1. As measuring temperature of curing unit tips, Flipo is the highest as