초록
전기화학적으로 이온을 흡착시켜 제거시키는 capacitive deionization(CDI) 공정용 전극으로 탄소에어로젤에 실리카젤이 첨가된 다공성 탄소에어로젤 복합전극을 사유하여 1,000ppm NaCl수용액에서 10회와 100회 동안 싸이클을 변화시켜 탈염과 재생 특성에 대한 충전과 방전 시 시간에 따른 전류변화, 싸이클에 대한 전하량 변화, 그리고 CDI효율을 조사하였다. Paste rolling법으로 제조된 탄소에어로젤 복합전극은 CDI반응진행에 대한 전극 활물질의 탈락이 없이 전극의 성형성이 크게 향상되었고, 전극시트 제조시간을 $50\%$ 이상 단축시킬 수 있었다. 10분동안 충전과 방전으로 10회 싸이클까지의 전하량 결과를 살펴보면, $50wt.\%$의 실리카젤이 첨가된 C복합전극의 평균 충전 전하량이 실리카젤이 첨가되지 않은 A전극에 비해 $3\%$ 증가하였으며, 평균 방전 전하량은 $7\%$증가하였다. 5분동안 충전과 방전으로 100회 싸이클까지 평균 충전 전하량을 보면 $25w1.\%$와 $50wt.\%$의 실리카젤이 첨가된 B복합전극과 C복합전극은 A전극에 비해 각각 $6\%,\;14\%$증가하였으며, 또한 평균 방전 전하량도 각각 $9\%,\;21\%$증가하여 복합전극의 전하량 특성이 매우 우수하였다. 100회 싸이클까지의 CDI효율은 싸이클이 진행되면서 $70\%$ 이상으로 안정하게 유지하였고, 100회 싸이클에서는 B 복합전극이 $72.3\%$, C 복합전극이 $74.0\%$로 A 전극$(63.1\%)$보다 $10\%$이상 우수한 CDI 효율을 나타내었다.
Porous carbon aerogel-silica gel composite materials were used as the electrodes of capacitive deionization(CDI) process, which were prepared by a paste rolling method. The electrochemical parameters such at current values, coulombs af a function of cycle, and CDI efficiencies were investigated for 10th and 100th cycles in 1,000ppm NaCl solution. Carbon aerogel-silica gel composite electrodes showed good wet-ability and higher mechanical strengths even under the NaCl solutions as well. In our experimented runs, all of the composite electrodes also are showed good cycle-ability without destroy of active material during cycles and decreased manufacturing times by $50\%$. Conclusively, the adding of silica gel powder to carbon aerogel leads to the effective performance of CDI process due to effective utilization of active materials by increasing the wet-ability and mechanical hardness.