Fabrication and Application of BIS Base Station Antenna in Jeon-Ju City

전주시 BIS 기지국용 안테나 제작 및 활용

  • Published : 2004.12.01

Abstract

This paper describes the design, fabrication, and measurement of a omni-directional beam pattern antenna for base station of the BIS which is one of the ITS services. The antenna is installed on the signal lamp of important crossroad and provides the wireless communication link between vehicles and RSE(Road Side Equipment). The required characteristics of BIS base station antenna are omni-directional beam pattern and specific beam pattern by the road and install environment and installed place of OBU. To get omni-directional beam pattern of antenna, Array configuration and OMA are applied. The measured results of fabricated antenna are as follows; return loss of 640MHz by -10 dB, and a gain of 10.3dBi. It is found that the measured beam patterns are similar to design results.

본 논문에서는 ITS 서비스 구성 요소 중의 하나인 BIS(Bus Information System)의 기지국용 전방향성 안테나를 설계 및 제작하고 그 특성을 측정하였다. 제작된 BIS 기지국용 안테나는 전주시 도심의 주요 교차로의 신호등 gantry에 설치된다. 통신 영역이 차선의 개수와 교차로 크기, 도로의 방향에 따라 상이한 경우에도 요구된 통신 성능을 얻기 위해 최대 100m 통신 영역을 화보하기 위해 10dBi 정도의 고 이득이 요구된다. 이를 위해 OMA(Omni-directional Planar Microstrip Antenna)를 배열한 구조를 적용하였다. 제작된 안테나의 동작 중심 주파수는 5.8GHz이고, 반사손실은 -10 dB를 기준으로 640MHz 이상, 이득은 10.3dBi를 얻었으며, 빔 패턴은 전방향성으로 시뮬레이션 결과와 측정 결과가 유사하게 나타나고 있다.

Keywords