DOI QR코드

DOI QR Code

원형 확장 휜 열 교환기의 치수 강건최적설계

Design of Annular Finned Heat Transfer Tube Using Robust Optimization

  • 윤지원 (연세대학교 대학원 기계공학과) ;
  • 이종수 (연세대학교 대학원 기계공학과) ;
  • 정우진 (연세대학교 기계공학부)
  • 발행 : 2003.09.01

초록

Most optimization problems do not consider tolerance of design variables and design parameters. Ignorance of these tolerances may not fit for the practical problems and can lead to an unexpected conclusion. That is why we suggest robust optimization considering tolerances in both design variables and problem parameters. Using robust optimization, we designed minimum weight annular finned heat transfer tube subject to constraints on limitation of pressure difference and minimum value of total heat transfer. Consequently, robust optimization satisfies tolerance considered practical problems.

키워드

참고문헌

  1. Kim, C. D., 2002 'Heat Transfer and Pressure Drop Characteristics of Fin and Tube Heat Exchanger for Air Conditioner,' Ph. D. Thesis, University of Yonsei, Seoul, Korea
  2. Ahn, B. C., 2002 'Robust Optimization Considering Tolerance Bands of Design Variables and Material Properties,' Master Thesis, University of Yonsei, Seoul, Korea
  3. Fowlkes, William. Y., 1995, Engineering Methods for Robust Product Design, Addison-Wesley, New York, p. 403
  4. A. Parkinson, 1995, 'Robust Mechanical Design in Using Engineering Models,' Journal of Mechanisms, Transmissions, and Automation in Design, Transactions of the ASME, Vol. 117, pp. 47-53
  5. Park, S. H., 2002, Design of Experiment, Minyongsa
  6. Frank P. Incropera, David P. DeWitt, 1996, Introduction to Heat Transfer, WILEY
  7. Kern, D. Q., and Krau, A. D., 1972, Extended Surface Heat Transfer, McGraw-HilI Book Company, New York
  8. Briggs, D. E., and Young, E. H., Chem, Eng., 1963, 'Heat transfer-Houston,' Prog, Symp. Series No. 41, 59, 1
  9. Wolverine Tube Heat Transfer Data Book, pp. 209-242
  10. Lee, K. H, Park, G. J., 1997, 'Robust Structural Optimization Considering the Tolerances of Design Variables,' Transactions of the KSME, A, Vol. 21, No. 1, pp.112-123
  11. Balling R. J., and Free J. C., Parkinson R., 1986, 'Consideration of Worst-Case Manufacturing Tolerance in Design Optimization,' Journal of Mechanism, Transmissions, and Automation in Design, Transactions of the ASME, Vol. 108, pp. 438-441 https://doi.org/10.1115/1.3258751
  12. Kim, S. K., 2000, 'Design of Heat Transfer System and Thermodynamics Calculations,' Singisul