The Journal of Korean Academy of Prosthodontics (대한치과보철학회지)

The Korean Academy of Prosthodonitics (대한치과보철학회)
권호 표지

THE FRACTURE RESISTANCE AND STRESS DISTRIBUTION OF ALL CERAMIC CROWNS WITH TWO TYPES OF FINISH LINE ON MAXILLARY CENTRAL INCISOR

상악중절치에서 전부도재관의 finish line형태에 따른 파절강도와 응력 분포에 관한 연구

  • Ki Tae-Seok (Dept. of Prosthodontics, School of Dentistry, Wonkwang University) ;
  • Kim Kyea-Soon (Dept. of Prosthodontics, School of Dentistry, Wonkwang University) ;
  • Lee Jin-Han (Dept. of Prosthodontics, School of Dentistry, Wonkwang University) ;
  • Kim Yu-Lee (Dept. of Prosthodontics, School of Dentistry, Wonkwang University) ;
  • Dong Jin-Keun (Dept. of Prosthodontics, School of Dentistry, Wonkwang University)
  • 기태석 (원광대학교 치과대학 치과보철학교실) ;
  • 김계순 (원광대학교 치과대학 치과보철학교실) ;
  • 이진한 (원광대학교 치과대학 치과보철학교실) ;
  • 김유리 (원광대학교 치과대학 치과보철학교실) ;
  • 동진근 (원광대학교 치과대학 치과보철학교실)
  • Published : 2003.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

Purpose : The purpose of this study was to compare the fracture resistance of the IPS Empress ceramic crown with 1.0mm width rounded shoulder, which is usually recommended in all ceramic crown. and 0.5mm width chamfer finish lines on the maxillary central incisor. Material and method : After 15 metal dies were made for each group, the IPS Empress all ceramic crowns were fabricated and cemented with resin cement(Bistite resin cement, Tokuyama Soda Co. LTD., Japan) on the metal die. The cemented crowns were mounted on the positioning jig and the universal testing machine(Zwick Z020, Zwick Co. Germany)was used to measure the fracture strength with loading on the incisal edge. And also, three-dimensional finite element stress analysis was used to measure the stress distribution with the various types of the finish lines(1.0mm width rounded shoulder, 0.5mm width chamfer), the loading site(incisal edge, incisal $\frac{1}{3}$) and the type of loading(concentration loading, distribution loading). Results and conclusion : 1. In the fracture resistance experiment according to the finish line, the mean fracture strength of rounded shoulder(876N) and the mean fracture strength of chamfer(882N) did not skew any significant difference between each other(p>0.05). 2. The stress distribution of all ceramic crown in three dimensional finite element analysis showed concentration aspect at loading point and cervical area or labial surface. 3. In metal die, there were no differences in stress distribution between finish lines, but in natural teeth model, chamfer finish line showed higher stress than rounded shoulder finish line. 4. When force was loaded on the incisal edge the stress was concentrated on the incisal edge and the cervical area of labial surface. When force was loaded on the incisal $\frac{1}{3}$, the stress concentrated on the cervical area of labial surface and the cingulum area. 5. Generally, natural teeth model showed higher and various stress than the metal die.

Keywords

References

  1. Southan DE, Jorgensen KD. Faulty porcelain jacket crowns. Aust Dent J 1973:18:152-156
  2. Anusavice KJ. Degradability of dental ceramics. Adv Dent Res 1992;6:82-9 https://doi.org/10.1177/08959374920060012201
  3. Chan C, Weber H. Plaque retention on teeth restored with full-ceramic crowns: A comparative study. J Prosthet Dent 1986;56:666-71 https://doi.org/10.1016/0022-3913(86)90140-X
  4. Grey NJA. Piddock V, Wilson MA. In vitro comparison of conventional crowns and a new all-ceramic system. J Dent 1993;21:47-51 https://doi.org/10.1016/0300-5712(93)90051-Q
  5. Josephson BA, Schulman A, Dunn ZA, Hurwitz W. A compressive strength study of complete ceramic crowns, Part II. J Prosthet Dent 1991;65:388-391 https://doi.org/10.1016/0022-3913(91)90230-T
  6. Ching CL, O' Brien WJ. Strength of magnesia-core crown with different body porcelain. Int J Prosthodont 1993;6:60-64
  7. Probster L. Compressive strength of two modern all-ceramic crowns. J Prosthodont 1992;5:409-414
  8. Friedlander LD, Munoz CA, Goodacre CJ, Doyle MG, Moore BK. The effect of tooth preparation design on the breaking strength of Dicor crowns. Int J Prosthodont 1993;3:159-168
  9. Claus H. Das Hi-Ceram Verfahren metallfreie Kronen auf einem Keramikgerust. Dent Labor 1987;35:479
  10. Optec HSP laboratory technique manual. Jeneric/Pentron Inc, Wallingford, Conn, January, 1988
  11. Beham G. IPS-Empress:A new ceramic technology. Ivoclar-Vivadent report 1990;6:1-13
  12. Schwickerrath H. Die In-Ceram Aluminiumoxid- Keramik ein innovativer dentalkelamischer Werkstoff. Dent Labor 1989;37:1597
  13. Adair PJ, Grossman DG. The castable ceramic crown. Int J Periodont Rest Dent 1984;2:32-45
  14. Dicor laboratory manual. Dentsply Int., York., PA, 1987
  15. Machert JR Jr, Russel C. Leucite crystallization of a heat-pressed dental ceramic. Int J Prosthodont 1996;9:261
  16. Kelly JR, Giordano R. Pober R. Cima MJ. Fracture surface analysis of dental ceramics clinically failed restorations. Int J Prosthodont 1990;3:430-440
  17. Kern M. Doglas WH, Fechtig T. Strub JR. Delong R. Fracture strength of all-porcelain. Resin bonded bridges after testing in an artificial oral environment. J Dent 1993;21:117-121 https://doi.org/10.1016/0300-5712(93)90160-R
  18. Doyle MG, Goodacre CJ, Andres CJ. The effect of tooth preparation design on the breaking strength of Dicor crown: Part 3. Int J Prosthodont 1990;3:327-340
  19. Friedlander LD, Munoz CA, Goodacre CJ, Doyle MG, Moor BK. The effect of tooth preparation design on breaking strength of Dicor crowns: Part 1. Int J Prosthodont 1990;3:159-168
  20. Yoshinari M, Derand T. Fracture strength of all-ceramic crowns. Int J Prosthodont 1994;7:329-338
  21. Pettrow JN. Practical factors in building and firing characteristics of dental porcelain. J Prosthet Dent 1961;11:334 https://doi.org/10.1016/0022-3913(61)90209-8
  22. Argue JE. The preparation of teeth for porcelain jacket crown. J Am Dent Assoc 1988;67:1259-1270
  23. Oppice HW. A resume of ideas on porcelain jacket crown preparation, J Am Dent Assoc 1934;21:1030-1039
  24. Rosenstiel SF, Land MF, Fujimoto M.:Contemporary fixed prosthodontics. 3rd ed., Mosby Co., 2001
  25. Dykema RW, Goodacre CJ, Phillips RW. Johnston's modern practice in fixed prosthodontics. 4th ed., W.B.Saunders Co.. 1986
  26. Malament KA, Grossman DG. The cast glass-ceramic restoration. J Prosthet Dent 1987;57:674-685 https://doi.org/10.1016/0022-3913(87)90362-3
  27. Dicor: Clinical Procedures Manual, Dentply, 1984
  28. Futterknecht N, Jinoian V. A Renaissance of ceramic prosthetics?, QDT 1992;15:65-78
  29. Hills A. All-ceramic restorations with the In-Ceram system: 6 years of clinical experience. Vita, 1995
  30. Kim HS, Ju TH, Oh SC, Dong JK. A Study on the fracture strength of the lPS-Empress ceramic crown according to margin type. J Korean Acad Prosthodont 1997;35:296-307
  31. Browning JD, Meador LW, Eick JD. :Movement of three removable partial denture clasp assemblies under occlusal loading. J Prosthet Dent 1986;55:69-74 https://doi.org/10.1016/0022-3913(86)90076-4
  32. Derand T. Effect of variation in the shape of the core on stresses in a loaded model of a porcelain crown. Odontol Rev 1974;25:11-26
  33. Ryden H. The laser beams for measuring tooth mobility and tooth movement. J Periodontol 1979;45:283-287
  34. Young TM, Altschuler BR. Laser holography in dentistry. J Prosthet Dent 1977;38:216 https://doi.org/10.1016/0022-3913(77)90289-X
  35. Fairly JM. Preparation of a maxillary central incisor for porcelain jacket preparation. Br Dent J 1958;18:208
  36. Walton CB, Leven MM. A preliminery report of photoelastic tests of strain pat- terns whit in jacket crowns. J Am Dent Assoc 1955;50:44-48 https://doi.org/10.14219/jada.archive.1955.0003
  37. Park CK, Lee SH, Chung HY, Jang JH. A study on the stress distribution of cantilever bridge under maximum bite force and functional bite force using three dimensional finite element method. J Korean Acad Prosthodont 1994;32:484-500
  38. Lee KY, Chang IT. Three dimensional finite element analysis of the effects of alveolar bone loss on stress distribution in post reconstruction teeth. J Korean Acad Prosthodont 1997;35:674-688
  39. Choi SY, Lee SH, Yang JH, Chung HY. A study on stress distribution of endodontically treated tooth according to the various post length using three dimensional finite element method. J Korean Acad Prosthodont 1995;33:177-197
  40. Anusavice KJ, Hojjatie B. Influence of incisal length of ceramic and loading orientation on stress distribution in ceramic crown. J Dent Res 1988;67:1371-1375 https://doi.org/10.1177/00220345880670110201
  41. Anusavice KJ, Hojjatie B. Stress distribution in metal-ceramic crowwith a facial porcelain margin. J Dent Res 1987;66:1493-1498 https://doi.org/10.1177/00220345870660091601
  42. Chai JY, Steege JW. Effect of labial margin design on stress distribution of a porcelain fused to metal crown. J Prosthodont 1992;1:18-23 https://doi.org/10.1111/j.1532-849X.1992.tb00421.x
  43. Farah JW, Craig RG. Distribution of stresses in porcelain-fused-to-metal and porcelain jacket crowns. J Dent Res 1974;54:255-261
  44. Hojjatie B, Anusavice KJ. Three dimentional finite element analysis of glass-ceramic dental crowns. J Biomechanics 1990;23:1157-1166 https://doi.org/10.1016/0021-9290(90)90008-Q
  45. Derand T. Stress analysis of cemented or resin-bonded loaded porcelain inlay. Dent. Mater 1991;7:21-24
  46. Peyton FA, Mahler DB, Hershenov B. Physical properties of dentin. J Dent Res 1952;31:369-370
  47. Rubin C, Krishnamurthy N, Capilouto E. Yi H. Stress analysis of the human tooth using a three dimentional finite element model. J Dent Res 1983;62:82-86 https://doi.org/10.1177/00220345830620021701
  48. Seghi RR, Denry IL, Rosential SF. Relative fracture toughness and hardness of new dental ceramics. J Dent Prosthet 1995;74:145-150 https://doi.org/10.1016/S0022-3913(05)80177-5
  49. Scherrer SS, Rijk WG. Factors in the fracture resistance of posterior all ceramic crowns. J Dent Res 1991;70:434
  50. Hobo S, Iwata T. Castable apatite ceramics as a new biocompatible restorative material. I. Theoretical considerations. Quintessence Int 1985;16:451-458
  51. Sozio RB, Riley EJ. Shrink free ceramic. Dent Clin North Am 1985;29:705-717
  52. IPS-Empress manual. Ivoclar, Schann, Liechtenstein
  53. Davis DR. Comparison of fit of two types of all-ceramic crowns. J Prosthet Dent 1988;59:12 https://doi.org/10.1016/0022-3913(88)90098-4
  54. Dickinson AJG, Moore BK. Harris RK. Dykema RW. A comparative study of the strength of aluminous porcelain and all-ceramic crowns. J Prosthet Dent 1989;61:297 https://doi.org/10.1016/0022-3913(89)90132-7
  55. Vahidi F, Egloff ET, Panno FV. Evaluation of marginal adaptation of all ceramic crowns and metal ceramic crowns. J Prosthet Dent 1991;66:426 https://doi.org/10.1016/0022-3913(91)90499-M
  56. Sjogren G, Bergman M. Relationship between comparessive strength and cervical shaping of the all-ceramic Cerestore crown. Swed Dent J 1987;11:147-150
  57. Bernal G, Jones RM, Brown DT, Munoz CA, Goodacre CJ. The effect of finish line form and luting agent on the breaking strength of Dicor crowns. Int J Prosthodont 1993;6:286-290
  58. Edelhoff D, Sorensen JA. Tooth structure removal associated with various preparation design for anterior teeth. J Prosthet Dent 2002;87:503-509 https://doi.org/10.1067/mpr.2002.124094
  59. Calamia JR. Clinical evaluation of etched porcelain veneers. Am J Dent 1989;2:915
  60. Walls AWG. The use of adhesively retainded all-porcelain veneer during the management of fractured and worn anterior teeth. part II. clinical results after 5 years follow-up. Br Dent J 1995;178:337-339 https://doi.org/10.1038/sj.bdj.4808759
  61. Dunne SM, Millar J. A longitudinal studyof the clinical performance of porcelain veneer. Br Dent J 1993;175:317-321 https://doi.org/10.1038/sj.bdj.4808314
  62. Crothers AJR, Wassell RW, Allen R. The resin-bonded porcelain crown: A rationale for use on anterior teeth. Dental update 1993;Nov;388-395
  63. Jensen ME, Sheth JJ, Tolliver D. Etchedporcelain resin-bonded full-veneer crowns: in vitro fracture resistance. Compend Contin Educ Dent 1989;6:336-346
  64. Lee SW, Lee SH, Yang JH, Chung HY. The effect of surface treatment on fracture strength of dental ceramics. J Korean Acad Prosthodont 1999;37:658-669
  65. Duffin JL, Bales DJ, Johnson GH. Fracture resistance of castable ceramic crowns (abstract). J Dent Res 1989;68:235
  66. Hsu CS, Stangel I, Nathanson D. Shear bond strength of resin to etched porcelain J Dent Res 1985;64:296
  67. Mcinnes-Ledoux PM, LedouxWR, Weinberg R, Pappold A. Luting castable ceramic restorations- a bond strength study J Dent Res 1987;66:245. abstr No. 802
  68. Deboever JA, McCall WD, Holden S, Ash MM. Functional occlusal forces : An investigation by telemetry. J Prosthet Dent 1978:40:326-333
  69. Kawamura Y. Oral physiology. Kyoto, Japan, Nagamatsu Shoten, 1966;212-227
  70. Korber KH, Ludwig K. Maximale Kaukraft als Berechnungsfaktor zahntechnischer Konstruktionen. Dent Labor 1983;31:55-60
  71. Wal JG, Reisbick MH. Johnston WM. .Incisal-edge strength of porcelain laminate veneers restoring mandibular incisors. Int J Prostohodont 1992;5:441-446
  72. Ramfjord S. Ash MM. Occlusion. Third ed. W.B. Saunders Co. 1983
  73. Ringquist M. Isometric bite force and its relationship to dimensions of the facial skeleton. Acta Odonto Scand 1973;31:35 https://doi.org/10.3109/00016357309004611