Characterization of PDP Performance Prepared by Vacuum In-line Sealing Technology

  • Kwon, Sang-Jik (Dept. of Electronics Eng., Kyungwon University) ;
  • Kim, Jee-Hoon (Dept. of Electronics Eng., Kyungwon University) ;
  • Whang, Ki-Woong (School of Electrical Engineering, College of Engineering, Seoul National University)
  • 발행 : 2003.12.21

초록

By using vacuum in-line driving and photoluminescence measuring system, we have examined the electrical and optical characteristics of plasma display panel produced by vacuum in-line sealing technology. In addition, the relationship between luminous efficiency and base vacuum level before filling discharge gas was analyzed. In the case of base vacuum level of $1.33{\times}10^{-1}$ Pa, the firing voltage of a 2-inch diagonal PDP panel was ranged from 312 to 343 V depending on the discharge gas pressure of $2.667{\times}10^4$ to $4{\times}10^4$ Pa at room temperature, Whereas in the case of $1.33{\times}10^{-4}$ Pa, the firing voltage was reduced by 40 V and luminescence was improved slightly.

키워드

참고문헌

  1. S. J. Kwon, K. C. Hong, J. H. Sung, C. H. Lee, K. W. Whang, C. K. Yoon, and J. D. Lee, J. Korean Phys. Soc., 37, 252 (2000)
  2. S. J. Kwon, K. S. Ryu, T. H. Cho, and J. D. Lee, J. Korean Phys. Soc., 33, S440 (1998)
  3. S. J. Kwon, H. C. Yang, and K. W. Whang, J. Vac. Tech. A, 21, 206 (2003) https://doi.org/10.1116/1.1531139
  4. S. J. Kwon, H. C. Yang, M. S. Lee, D. C. Jung, K. W. Whang, K. S. Lee, S. H. Hong, and Y. B. Kwon, SID02 Digest, 320 (2002)
  5. S. J. Kwon, H. C. Yang, M. S. Lee, K. W. Whang, and D. C. Jung, IMID02 Digest, 643 (2002)
  6. S. J. Kwon, H. C. Yang, M. S. Lee, K. W. Whang, and D. C. Jung, ASID02 Digest, 473 (2002)