References
- Lai, Y. G., Przekwas, A. J., and Nguyen, H., "A Concurrent Multi-Disciplinary Approach for the Analysis of Liquid Rocket Engine Combustors," AIAA-94-3103, 1994
- Liang, P. Y., Fisher, S., and Chang, Y. M., "Comprehensive Modeling of a Liquid Rocket Combustion Chamber," J. Propulsion Power, vol. 2, no. 2, pp. 97-104, 1986 https://doi.org/10.2514/3.22851
- Badinand, T. and Fransson, T. H., "Radiative Heat Transfer in Film-Cooled Liquid Rocket Engine Nozzles," J. Thermophysics Heat Transfer, vol. 17, no. 1, pp. 29-34, 2003 https://doi.org/10.2514/2.6748
- Baumann, W. W. and Thiele, F., "Heat and Mass Transfer in Evaporating Two-Component Liquid Film Flow," Int. J. Heat Mass Transfer, vol. 33, no. 2, pp. 267-273, 1990 https://doi.org/10.1016/0017-9310(90)90097-E
- Yan, W. M., "The Effect of Liquid Film Vaporization on Natural Convection Heat and Mass Transfer in a Vertical Tube," The Canadian J. Chemical Engineering, vol. 70, pp. 452-460, 1992 https://doi.org/10.1002/cjce.5450700307
- Yan, W. M. and Soong C. Y., "Numerical Study of Liquid Film Cooling in a Turbulent Gas Stream," Int. J. Heat Mass Transfer, vol. 36 no. 16, pp. 3877-3885, 1993 https://doi.org/10.1016/0017-9310(93)90138-V
- Yan, W. M. and Soong C. Y., "Convective Heat and Mass Transfer Along a Inclined Heated Plate with Film Evaporation," Int. J. Heat Mass Transfer, vol. 38 no. 7, pp. 1261-1269, 1995 https://doi.org/10.1016/0017-9310(94)00241-M
- Roncace, E. A., "Liquid Oxygen Cooling of Hydrocarbon Fueled Rocket Thrust Chambers," J. Propulsion Power, vol. 7, no. 5, pp. 717-723, 1991 https://doi.org/10.2514/3.23384
- Aupoix, S., Mignosi, A., Viala, S., Bouvier, F., and Gaillard, R., "Experimental and Numerical Study of Supersonic Film Cooling," AIAA J., vol. 36, no. 6, 1998
- Choi, C. E. and Baek, S. W., "Numerical Analysis of a Spray Combustion with Nongray Radiation Using Weighted Sum of Gray Gases Model," Combust. Sci. Tech., vol. 115, pp. 297-315, 1996 https://doi.org/10.1080/00102209608935533
- Byun, D. Y., "Film Cooling Phenomena in a Liquid Rocket Engine," Ph. D. Thesis, KAIST, Taejon, Korea, 2000
- 변도영, 김만영, 백승욱, “비회체 열복사 및 검댕생성을 고려한 액체로켓 엔진의 연소현상 해석,” 한국항공우주학회지, 투고중, 2003 https://doi.org/10.5139/JKSAS.2004.32.1.074
- Li, S. C., Libby, P. A., and Willams, F. A., "Spray Impingement on a Hot Surface in Reacting Stagnation Flows," AIAA J., vol. 33, no. 6, pp. 1046-1055, 1995 https://doi.org/10.2514/3.12526
- Mundo, C., Sommerfeld, M., and Tropea, C., "On the Modeling of Liquid Sprays Impinging on Surfaces," Atomization Sprays, vol.8, pp. 625-652, 1998 https://doi.org/10.1615/AtomizSpr.v8.i6.20
- Wang, D. M., and Watkins, A. P., "Numerical Modeling of Diesel Spray Wall Impaction Phenomena," Int. J. Heat Fluid Flow, vol. 14, no. 3, 1993
- Kang, S. J., "Study of Flow Characteristics and Droplet Size for Impinging Injector," KARI Project Report, 1999
- Liu, J. and Tiwari, S. N., "Radiative Heat Transfer Effects in Chemically Reacting Nozzle Flows," J. Thermophysics Heat Transfer, vol. 10, no. 3, pp. 436-444, 1996 https://doi.org/10.2514/3.808