Application of GIS for Selection of Logging Operation Machine

벌출작업 기종의 선정을 위한 GIS 활용

  • Jeon, Kwon-Seok (Chungbu Experiment Station, Korea Forest Research Institute) ;
  • Ma, Ho-Seop (Division of Forest Science, Gyeongsang National University)
  • 전권석 (임업연구원 중부임업시험장) ;
  • 마호섭 (경상대학교 산림과학부)
  • Received : 2003.02.19
  • Accepted : 2003.03.22
  • Published : 2003.03.31

Abstract

This study was aimed at suggest a proper logging method of mountain forest using geographic information system(GIS) based on digital terrain model(DTM) in the National Forest at Mt. Kumsan in Namhae-gun, Gyungsangnam-do, which has about 2,948 ha in area. The areal percentage of 201 to 250m in the elevation was about 15.5%, elevation of 251 to 300m was 14.5%, and 78.75% for higher than 400m. The accumulated areal percentage of below 30% in the gradient was 17.2%, and 81.0% for steeper than 60%. The area for tractor skidding was 17.2%(511.7ha), the area for tractor attached winch skidding was 63.8%(1,896.3ha) and 18.4%(545.5ha) for cable yarding. It is important to choose the proper logging machines for timber harvesting. In general, the selection of logging operation system was affected several major environmental factors like as terrain conditions(slope gradient, slope length) and stand factors. The rate of middle slope gradients in terrain conditions showed higher than that of steep slope gradients in this area. Therefore, it considered that the logging operation system in this area could apply to tractor+winch operating machine according to terrain conditions.

지리정보시스템(GIS)에 의하여 구축되어진 수치지형모델(DTM)을 이용하여 경상남도 남해군 금산의 국유림(2,948ha)을 대상으로 지형분석을 실시한 후, 현재 우리나라에서 보유하고 있는 벌출작업기계 3기종을 선택하여 산림경영계획의 측면에서 지형별 투입가능한 산림작업기계의 영역을 분류하고 적용성을 검토하였다. 금산의 표고는 201~250m(15.5%), 251~300m(14.5%)의 순으로 분포하였으며, 400m까지의 누적 면적점유율은 78.7%로서 비교적 표고가 낮은 것으로 나타났다. 대상임분, 작업규모, 경사 및 지형에 따른 차량계 벌출작업기계의 투입가능한 지역(경사 30% 이하)은 17.2%(511.7ha)였으며, 윈치부착 차량계 벌출작업기계의 투입가능한 지역(경사 31~60%)은 63.8%(1,896.3ha)였고, 가선계가 가능한 지역(경사 61~80%)은 18.4%(545.5ha)로 나타났다. 본 지역의 경우 중경사지형의 점유율이 81.0%로서 집재기종 중 트랙터부착 집재기(Logging Boogie)의 사용이 적절하다고 판단되며, 이는 향후 대상지역의 산림작업 계획시 기초자료로 활용할 수 있을 것이다. 임목수확작업에 필요한 기계의 이용계획과 작업방법을 선정할 경우에는 지형, 임도망, 임상, 작업규모, 노동력과 작업기술, 기계 및 자본력 등 많은 인자들이 중요한 결정요인이지만 무엇보다도 지형적인 요소가 가장 중요한 요인이다. 특히, 지형정보시스템을 이용하여 집재지형을 분류하면 산지사면의 경사길이와 경사도에 따라 벌출작업이 가능한 대표기종의 선정에 많은 도움이 될 수 있을 것이다.

Keywords