DOI QR코드

DOI QR Code

Analysis of rigid and semi-rigid steel-concrete composite joints under monotonic loading - Part I: Finite element modelling and validation

  • Amadio, C. (Department of Civil Engineering, University of Trieste) ;
  • Fragiacomo, M. (Department of Civil Engineering, University of Trieste)
  • 발행 : 2003.10.25

초록

The paper concerns the modelling of rigid and semi-rigid steel-concrete composite joints under monotonic loading through use of the Abaqus program, a widespread finite element code. By comparing numerical and experimental results obtained on cruciform tests, it is shown that the proposed modelling allows a good fit of the global joint response in terms of moment-rotation law. Even the local response in terms of stresses and strains is adequately predicted. Hence, this numerical approach may represent a useful tool for attaining a better understanding of experimental results. It may also be used to perform parametric analyses and to calibrate simplified mechanical models for practical applications.

키워드

참고문헌

  1. Amadio, C. and Altin, G. (1995), "Valutazione della risposta inelastica di travi composte acciaio-calcestruzzo mediante il codice di calcolo Abaqus", Proc. of the 2nd Italian Workshop on Composite Structures, Naples, Italy, June, 1-17 (in Italian).
  2. Amadio, C. and Piva, M. (1995), "Valutazione della risposta di giunti composti rigidi o semi-rigidi mediante modellazione agli elementi finiti", Proc. of the 15th C.T.A. Conf., Riva del Garda, Italy, October, 44-55 (in Italian).
  3. Anderson, D. and Najafi, A.A. (1994), "Performance of composite connections: major axis end plate joints", J. of Constructional Steel Research, 31(1), 31-57. https://doi.org/10.1016/0143-974X(94)90022-1
  4. Aribert, J.M. (1995), "Influence of slip of the shear connection on composite joint behaviour", Proc. of the 3rd Int. Workshop on Connections in Steel Structures, Trento, Italy, May.
  5. Bazant, Z. and Jirasek, M. (2002), Inelastic Analysis of Structures, John Wiley & Sons, LTD, Chichester, England.
  6. Benussi, F., Nethercot, D.A. and Zandonini, R. (1995), "Experimental behaviour of semi-rigid connections in frames", Proc. of the 3rd Int. Workshop on Connections in Steel Structures, Trento, Italy, May.
  7. Benussi, F., Puhali, R. and Zandonini, R. (1989), "Semi-rigid joints in steel-concrete composite frames", Costruzioni metalliche, 5, 1-28.
  8. Bursi, O.S. and Ballerini, M. (1997), "Low-cycle behaviour and analysis of steel-concrete composite substructures", Proc. of the Int. Conf. on Composite Construction - Conventional and Innovative, Innsbruck, Austria, September, 615-620.
  9. Bursi, O.S. and Gramola, G. (1997), "Smeared crack analyses of steel-concrete composite substructures", Proc. of the Stessa 97 Conf., Kyoto.
  10. CEN, European Committee for Standardisation (1992), Eurocode 3. Common Unified Rules for Steel Structure. ENV 1993-1-1.
  11. CEN, European Committee for Standardisation (1992), Eurocode 4. Common Unified Rules for Composite Steel and Concrete Structures. ENV 1994-1-1.
  12. CEN, European Committee for Standardisation (1997), Eurocode 4. Design of Composite Steel and Concrete Structures, Part 2. ENV 1994-2.
  13. Chen, W.F. (1984), Plasticity in Reinforced Concrete, McGraw-Hill, New York, U.S.A.
  14. Comite Euro-International du Beton (1993), "CEB-FIP Model Code 90", CEB Bull. No. 213/214, Lausanne.
  15. Comite Euro-International du Beton (1997), "Concrete Tension and Size Effects", CEB Bull. No. 237, Lausanne.
  16. Crisfield, M.A. (1991), Non-linear Finite Element Analysis of Solids and Structures. Vol. 1-2, John Wiley & Sons Ltd., Chichester, England.
  17. Cruz, P.J.S., Simoes da Silva, L.A.P., Rodrigues, S.D. and Simoes, R.A.D. (1998), "Database for the semi-rigid behaviour of beam-to column connections in seismic regions", J. of Constructional Steel Research, 46(1-3), Paper No. 120.
  18. Dissanayake, U.I., Burgess, I.W. and Davison, J.B. (2000), "Modelling of plane composite frames in unpropped construction", Eng. Struct., 22(4), 287-303. https://doi.org/10.1016/S0141-0296(98)00077-7
  19. Faella, C., Piluso, V. and Rizzano, G. (2000), Structural Steel Semirigid Connections, CRC PRESS, Bola Raton, Florida, U.S.A.
  20. Fang, L.X., Chan, S.L. and Wong, Y.L. (1999), "Strength analysis of semi-rigid steel-concrete composite frame", J. of Constructional Steel Research, 52(3), 269-291. https://doi.org/10.1016/S0143-974X(99)00032-2
  21. Filippou, F. and Zulfiqar, N. (1992), "Model of critical regions and their effect on the seismic response of reinforced concrete frames", Proc. of the 10th World Conf. on Earthquake Engineering, Rotterdam, July.
  22. Hibbit, Karlsson & Sorensen Inc. (1997), Abaqus, Version 5.7, U.S.A.
  23. Kattner, M. and Crisinel, M. (2000), "Finite element modelling of semi-rigid composite joints", Comput. Struct., 78, 341-353. https://doi.org/10.1016/S0045-7949(00)00064-X
  24. Leon, R. (1990), "Semi-rigid composite construction", J. of Constructional Steel Research, 15, 99-120. https://doi.org/10.1016/0143-974X(90)90044-H
  25. Leon, R., Hoffmann, J. and Staeger, T. (1996), Design of Partially Restrained Composite Connections, AISC Design Guide 9, American Institute of Steel Construction, Chicago.
  26. Leon, R. (1998), "Analysis and design problems for PR composite frames subjected to seismic loads", Eng. Struct., 20(4-6), 364-371. https://doi.org/10.1016/S0141-0296(97)00149-1
  27. Leon, R. and Darwin, D. (1998), "Design guide for partially restrained composite connections", J. Struct. Eng., 124(10), 1099-1114. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:10(1099)
  28. Leon, R., Hajjar, J., Gustafson, M. and Shield, C. (1998), "Seismic response of composite moment-resisting connections - II: behaviour", J. Struct. Eng., 124(8), 877-885. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:8(877)
  29. Li, T.Q., Nethercot, D.A. and Choo, B.S. (1996a), "Behaviour of flush end-plate composite connections with unbalanced moment and variable shear/moment ratios-I. Experimental behaviour", J. of Constructional Steel Research, 38(2), 125-164. https://doi.org/10.1016/0143-974X(96)00015-6
  30. Li, T.Q., Nethercot, D.A. and Choo, B.S. (1996b), "Behaviour of flush end-plate composite connections with unbalanced moment and variable shear/moment ratios-II. Prediction of moment capacity", J. of Constructional Steel Research, 38(2), 165-198. https://doi.org/10.1016/0143-974X(96)00016-8
  31. Li, T.Q., Moore, D.B., Nethercot, D.A. and Choo, B.S. (1996c), "The experimental behaviour of a full-scale, semi-rigidly connected composite frame: overall considerations", J. of Constructional Steel Research, 39(3), 167-191. https://doi.org/10.1016/S0143-974X(96)00040-5
  32. Li, T.Q., Moore, D.B., Nethercot, D.A. and Choo, B.S. (1996d), "The experimental behaviour of a full-scale, semi-rigidly connected composite frame: detailed appraisal", J. of Constructional Steel Research, 39(3), 193- 220. https://doi.org/10.1016/S0143-974X(96)00041-7
  33. Manfredi, G., Fabbrocino, G. and Cosenza, E. (1999), "Modeling of steel-concrete composite beams under negative bending", J. Eng. Mech., 125(6), 654-662. https://doi.org/10.1061/(ASCE)0733-9399(1999)125:6(654)
  34. Mazzolani, F.M. and Piluso, V. (1996), Theory and Design of Seismic Resistant Steel Frames, E & FN Spon, An Imprint of Chapman & Hall, London, U.K.
  35. Nethercot, D.A. (1995a), "Design of composite connection", The Structural Engineer, 73(13/4), 218-219.
  36. Nethercot, D.A. (1995b), "Semi-rigid joint action and design of non-sway composite frame", Eng. Struct., 17(9), 554- 567. https://doi.org/10.1016/0141-0296(95)00012-V
  37. Nethercot, D.A. and Zandonini, R. (1989), Methods of Prediction of Joint Behaviour: Beam-to-Column Connections. Stability and Strength. Edited by R. Narayanan. Elsevier applied science, 23-62.
  38. Nethercot, D.A. (1998), "Behaviour and design of composite connection", Proc. of the Int. Conf. COST C1 "Control of the semi-rigid behaviour of civil engineering structural connections", Liege, September.
  39. Puhali, R., Smotlak, I. and Zandonini, R. (1990), "Semi-rigid composite action: experimental analysis and a suitable model", J. of Constructional Steel Research, 15, 121-151. https://doi.org/10.1016/0143-974X(90)90045-I
  40. Ren, P., Crisinel, M. and Carretero, A. (1996), "Effets de la dalle en beton arme sur le comportement moment-rotation dassemblages metalliques pouter-poteau. Etude experimentale, analyse numerique et methode simplifiee", Construction Metallique, 3, 3-24 (in French).
  41. Stevens, N.J., Uzumeri, S.M., Collins, M.P. and Will, G.T. (1991), "Constitutive model for reinforced concrete finite element analysis", ACI Struct. J., 88(1), 49-59.
  42. Tschemmernegg, F. and Queiroz, G. (1995), "Mechanical modelling of semi-rigid joints for the analysis of framed steel and composite structures", Proc. of the 3rd Int. Workshop on Connections in Steel Structures, Trento, Italy, May.
  43. Tschemmernegg, F., Rubin, D. and Pavlov, A. (1998), "Application of the component method to composite joints", Proc. of the Int. Conf. COST C1 "Control of the semi-rigid behaviour of civil engineering structural connections", Liege, September.
  44. Wong, Y.L., Chan, S.L. and Nethercot, D.A. (1996), "A simplified design method for non-sway composite frames with semi-rigid connections", The Structural Engineer, 74(2), 23-28.
  45. Xiao, Y., Choo, B.S. and Nethercot, D.A. (1994), "Composite connections in steel and concrete. I. Experimental behaviour of composite beam-column connections", J. of Constructional Steel Research, 31(1), 3-30. https://doi.org/10.1016/0143-974X(94)90021-3
  46. Xiao, Y., Choo, B.S. and Nethercot, D.A. (1996), "Composite connections in steel and concrete. Part 2 Moment capacity of end plate beam to column connections", J. of Constructional Steel Research, 37(1), 63-90. https://doi.org/10.1016/0143-974X(95)00015-N
  47. Zandonini, R. (1989), Semi-Rigid Composite Joints. Edited by R. Narayanan. Elsevier applied science, 63-120.

피인용 문헌

  1. An alternative design for internal and external semi-rigid composite joints. Part II: Finite element modelling and analytical study vol.30, pp.1, 2008, https://doi.org/10.1016/j.engstruct.2007.03.010
  2. Evaluation of the connection efficiency of hybrid steel–concrete girder using finite element approach vol.61, pp.1, 2012, https://doi.org/10.1016/j.ijmecsci.2012.04.008
  3. Experimental study on seismic behavior of exterior composite beam-to-column joints with large size stiffened angles vol.37, pp.1, 2003, https://doi.org/10.12989/scs.2020.37.1.015