Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Effect of creep and shrinkage in a class of composite frame - shear wall systems

  • Sharma, R.K. (Department of Civil Engineering, Indian Institute of Technology) ;
  • Maru, Savita (Department of Civil Engineering, Engineering College) ;
  • Nagpal, A.K. (Department of Civil Engineering, Indian Institute of Technology)
  • Received : 2003.04.07
  • Accepted : 2003.08.20
  • Published : 2003.10.25
⟨ Previous Next ⟩

Abstract

The behaviour of composite frame - shear wall systems with regard to creep and shrinkage with high beam stiffness has been largely unattended until recently since no procedure has been available. Recently an accurate procedure, termed the Consistent Procedure (CP), has been developed which is applicable for low as well as for high beam stiffness. In this paper, CP is adapted for a class of composite frame - shear wall systems comprising of steel columns and R.C. shear walls. Studies are reported for the composite systems with high as well as low beam stiffness. It is shown that considerable load redistribution occurs between the R.C. shear wall and the steel columns and additional moments occur in beams. The magnitude of the load redistribution and the additional moment in the beams depend on the stiffness of the beams. It is also shown that the effect of creep and shrinkage are greater for the composite frame - shear wall system than for the equivalent R.C. frame - shear wall system.

Keywords

References

  1. Fintel, M., Ghosh, S.K., and Iyengar, H.S. (1987), "Column shortening in tall buildings - Prediction and compensation", Publ. EB108 D, Portland Cement Association, Skokie, III., 1-34.
  2. Fintel, M., and Khan, F.R. (1969), "Effects of column creep and shrinkage in tall structures - Prediction of inelastic column shortening", ACI J., 66, 957-967.
  3. Fintel, M., and Khan, F.R. (1971), "Effects of column creep and shrinkage in tall structures - Analysis for differential shortening of columns and field observation of structures", Paper SP 27-4, ACI Spec. Publ. 27, American Concrete Institute, Detroit, 95-119.
  4. Gilbert, R.I. (1988), Time Effects in Concrete Structures, Elseveir, Amsterdam, The Netherlands.
  5. Maru, S. (2000), "Analysis and behaviour of R.C. tall buildings incorporating creep and shrinkage", Ph.D thesis, IIT Delhi, India.
  6. Maru, S., Asfaw, M. and Nagpal, A.K. (2001), "A consistent procedure for creep and shrinkage effects in R.C. frames", J. Struct. Engrg., ASCE, 127(27), 726-732. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:7(726)
  7. Maru, S., Asfaw, M., Sharma, R.K. and Nagpal, A.K. (2003), "Effect of creep and shrinkage on R.C. frames with high beam stiffness", J. Struct. Engrg., ASCE, 129(4), 536-543. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:4(536)
  8. Maru, S., Sharma, R.K. and Nagpal, A.K. (2003), "Effect of creep and shrinkage on R.C. frame-shear wall systems with high beam stiffness", Accepted for publication in Structural Design of Tall Buildings. John Wiley & Sons.
  9. Sharma, R.K. (2002), "Behaviour of R.C. and composite tall buildings due to creep and shrinkage", Ph.D thesis, IIT Delhi, India.

Cited by

  1. Effect of beam stiffness-column reinforcement on creep and shrinkage behaviour of R.C frames vol.18, pp.3, 2009, https://doi.org/10.1002/tal.422
  2. Evaluation of creep and shrinkage effects in composite tall buildings vol.20, pp.7, 2011, https://doi.org/10.1002/tal.584
  3. Rapid prediction of long-term deflections in composite frames vol.18, pp.3, 2015, https://doi.org/10.12989/scs.2015.18.3.547