DOI QR코드

DOI QR Code

Ultimate moment capacity of foamed and lightweight aggregate concrete-filled steel tubes

  • Assi, Issam M. (Department of Civil Engineering, Al-Isra University) ;
  • Qudeimat, Eyad M. (Department of Civil Engineering, University of Jordan) ;
  • Hunaiti, Yasser M. (Department of Civil Engineering, University of Jordan)
  • 투고 : 2002.11.29
  • 심사 : 2003.06.05
  • 발행 : 2003.06.25

초록

An experimental investigation of lightweight aggregate and foamed concrete contribution to the ultimate strength capacity of square and rectangular steel tube sections is presented in this study. Thirty-four simply supported beam specimens, 1000-mm long, filled with lightweight aggregate and foamed concretes were tested in pure flexural bending to calculate the ultimate moment capacity. Normal concrete-filled steel tubular and bare steel sections of identical dimensions were also tested and compared to the filled steel sections. Theoretical values of ultimate moment capacity of the beam specimens were also calculated in this study for comparison purposes. The test results showed that lightweight aggregate and foamed concrete significantly enhance the load carrying capacity of steel tubular sections. Furthermore, it can be concluded from this study that lightweight aggregate and foamed concretes can be used in composite construction to increase the flexural capacity of the steel tubular sections.

키워드

참고문헌

  1. British Standard Institution. (1978), BS 4: Part 1, Structural Steelwork Handbook, Bournehall Press Ltd. London, England.
  2. British Standard Institute. (1979), BS 5400: Part 5, "Steel, concrete and composite bridges code of practice for design of composite bridges", London, England.
  3. "Common unified rules for composite, steel and concrete structures", 1985. Rep. Eurocode 4 (EC4), Commission of the European Communities (CEC), Brussels, Belgium.
  4. Composite Structures. (1981), European Convention for Constructional Steelwork. The Construction Press, London, England.
  5. Furlong, W. (1983), "Column rules of ACI, SSLC and LRFD Compared", Journal of Structural Engineering, ASCE, 109(10), 2375-2387. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:10(2375)
  6. Hanbin, G. and Usami, T. (1992), "Strength of concrete-filled thin-walled steel box columns: experiment", Journal of Structural Engineering, ASCE, 118(11), 3036-3054. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:11(3036)
  7. Hamdan, M. and Hunaiti, Y. (1991), "Factors affecting bond strength in composite columns", Porc. 3rd Int. Conf. On Steel-Concrete Composite Structures, Fukuoka, Japan, 213-218.
  8. Hunaiti, Y. (1994), "Aging effect on bond strength in composite sections", Journal of Materials in Civil Engineering, ASCE, 6(4), 469-473. https://doi.org/10.1061/(ASCE)0899-1561(1994)6:4(469)
  9. Hunaiti, Y. (1996), "Composite action of foamed and lightweight aggregate concrete", Journal of Materials in Civil Engineering, ASCE, 8(3), 111-113. https://doi.org/10.1061/(ASCE)0899-1561(1996)8:3(111)
  10. Hunaiti, Y. (1997), "Strength of composite sections with foamed and lightweight aggregate concrete", Journal of Materials in Civil Engineering, ASCE, 9(2), 58-61. https://doi.org/10.1061/(ASCE)0899-1561(1997)9:2(58)
  11. Jaradat, I. (1993), Shear Strength of Structural Lightweight Foamed Concrete Beams. MSc. Thesis, Univ. of Jordan, Amman, Jordan.
  12. Knowles, R. and Park, R. (1969), "Strength of concrete filled steel tubular columns", Journal of the Structural Division, ASCE, 95(12), 2565-2587.
  13. Roeder, C., Cameron, B. and Brown, C. (1999), "Composite action in concrete filled tubes", Journal of Structural Engineering, ASCE, 125(5), 477-484. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:5(477)
  14. Sabaleish, A. (1988), The Feasibility of Producing and Developing Lightweight Concrete from Local Jordanian Raw Materials. Rep., Royal Scientific Society (RSS), Amman, Jordan (in Arabic).
  15. Sakino, K., Tomii, M. and Watanabe, K. (1985), "Sustaining load capacity of plain concrete stub columns by circular steel tubes", Proc. Int. Spec. Conf. On Concrete Filled Steel Tubular Struct., Harbin, China, 112-118.
  16. Schneider, S.P. (1998), "Axial loaded concrete-filled steel tubes", Journal of the Structural Division, ASCE, 124(10), 1125-1138. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:10(1125)
  17. Shakir-Khalil, H. (1991), "Test on concrete-filled hollow section columns", Proc. 3rd Int. Conf. On Steel-Concrete Composite Structures, Fukuoka, Japan, pp. 89-94.
  18. Sherman, D. (1976), "Test of circular steel tubes in bending", Journal of the Structural Division, ASCE, 102(ST11), 2181-2195.
  19. Shuaib, A. and Barker, R. (1991), "Flexural behavior of reinforced high-strength lightweight concrete beams", Structural Journal, ACI, 88(1), 69-77.
  20. Tomii, M. and Yoshimura, K. and Morishita, Y. (1977), "Experimental studies on concrete filled steel tubular columns under concentric loading", International Colloquium on Stability of Structures Under Static and Dynamic Loads, Washington, DC., 718-741.
  21. Uy, B. (2000), "Strength of concrete filled steel box columns incorporating local buckling", Journal of Structural Engineering, ASCE, 126(3), 341-352. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:3(341)
  22. Virdi, K. and Dowling, P. (1980), "Bond strength in concrete filled steel tubes", Proc., IABSE P-33/80, Int. Assn. For Bridge and Struct. Engrg., 125-139.

피인용 문헌

  1. 08.05: Design of high strength concrete filled tubular columns vol.1, pp.2-3, 2017, https://doi.org/10.1002/cepa.231
  2. Design of Concrete Filled Tubular Beam-columns with High Strength Steel and Concrete vol.8, 2016, https://doi.org/10.1016/j.istruc.2016.05.005
  3. FLEXURAL BEHAVIOUR OF CONCRETE‐FILLED STEEL HOLLOW SECTIONS BEAMS vol.14, pp.2, 2008, https://doi.org/10.3846/1392-3730.2008.14.5
  4. Performance of lightweight aggregate and self-compacted concrete-filled steel tube columns vol.25, pp.3, 2003, https://doi.org/10.12989/scs.2017.25.3.299
  5. Mechanical performance of sand-lightweight concrete-filled steel tube stub column under axial compression vol.69, pp.6, 2019, https://doi.org/10.12989/sem.2019.69.6.627
  6. Performance of Lightweight Concrete with Expansive and Air-Entraining Admixtures in CFST Columns vol.32, pp.6, 2003, https://doi.org/10.1061/(asce)mt.1943-5533.0003143
  7. New methodology to analyze the steel-concrete bond in CFST filled with lightweight and conventional concrete vol.54, pp.1, 2021, https://doi.org/10.1617/s11527-020-01579-5
  8. Performance evaluation of natural fiber reinforced high volume fly ash foam concrete cladding vol.11, pp.2, 2003, https://doi.org/10.12989/acc.2021.11.2.151
  9. Analytical Modelling of LACFCST Stub Columns Subjected to Axial Compression vol.9, pp.9, 2021, https://doi.org/10.3390/math9090948