대기압 플라즈마로 처리된 폴리프로필렌 필름의 표면 자유에너지 변화

Surface Free Energy Change of Polypropylene Film treated by Atmospheric Pressure Plasma

  • 권오준 (충남대학교 화학공학과) ;
  • 탕쉰 (충남대학교 화학공학과) ;
  • 루나 (충남대학교 화학공학과) ;
  • 최호석 (충남대학교 화학공학과)
  • Kwon, Oh June (Department of Chemical Engineering, Chungnam National University) ;
  • Tang, Shen (Department of Chemical Engineering, Chungnam National University) ;
  • Lu, Na (Department of Chemical Engineering, Chungnam National University) ;
  • Choi, Ho Suk (Department of Chemical Engineering, Chungnam National University)
  • 투고 : 2003.11.07
  • 심사 : 2003.11.27
  • 발행 : 2003.12.25

초록

대기압 플라즈마를 이용하여 폴리프로필렌 필름의 표면을 처리한 후 각각 극성 용매(water)와 비극성 용매(diiodomethane)를 사용한 접촉각 측정기로 필름 표면의 접촉각을 측정하였다. 측정된 접촉각을 이용해 표면 자유에너지 변화를 계산한 후 대기압 플라즈마 처리 전후의 폴리프로필렌 필름의 접촉각과 표면 자유에너지 상태를 비교, 분석하였다. 또한 대기압 플라즈마의 처리 조건을 바꿔가며 폴리프로필렌 필름 표면을 처리함으로써 접촉각과 표면 자유에너지가 각각의 처리 조건에 따라 어떠한 영향을 받는지 연구하였다. 대기압 플라즈마 처리 조건에 따라 접촉각 및 표면 자유에너지는 최적값을 보여주거나 일정한 값에 도달하는 경향을 보여 주었다.

After atmospheric pressure plasma treatment of polypropylene(PP) film surface, we measured the contact angle of the surface by using polar solvent (water) and non-polar solvent (diiodomethane). We also calculated the surface free energy of PP film by using the measured values of contact angles. And then we analyzed contact angle and surface free energy with changing the condition of atmospheric pressure plasma treatment. Upon each condition of atmospheric plasma treatment, contact angle and surface free energy showed an optimum value or leveled off.

키워드