Manufacture of Nano-Sized Ni-ferrite Powder from Waste Solution by Spray Pyrolysis Process

분무열분해 공정에 의한 폐액으로부터 니켈 페라이트 나노 분말 제조

  • 유재근 (호서대학교 신소재공학전공) ;
  • 서상기 (호서대학교 신소재공학전공) ;
  • 강성구 (호서대학교 신소재공학전공) ;
  • 김좌연 (호서대학교 신소재공학전공) ;
  • 박시현 (호서대학교 신소재공학전공) ;
  • 김용수 (충북대학교 재료공학과) ;
  • 최재하 (충북대학교 재료공학과) ;
  • 손진군 (포항산업과학연구원)
  • Published : 2003.08.01

Abstract

In order to efficiently recycle the waste solution resulting from shadow mask processing, nano-sized Ni-ferrite powder was fab-ricated through spray pyrolysis process. The average particle size of the powder was below 100nm. In this study, the effects of the reaction temperature. the concentration of raw material solution and the injection speed of solution on the properties of powder were respectively investigated. As the reaction temperature increased from $800^{\circ}C$ to $1100^{\circ}C$, average particle size of the powder significantly Increased and power structure became more solid, whereat its specific surface area was greatly reduced. Formation rate and crystallization of($NiFe_2$$O_4$) phale increased along with the temperature rise. As the concentrations of iron and nickel components in wastere solution increased, particle size of the powder became larger, particle size distribution became more irregular, and specific surface area was reduced. Formation rate and crystallization of $NiFe_2$$O_4$ phase increased significantly along with the increase of the concentration of solution. As the inlet speed of solution increased, particle size of the powder became larger, particle size distribution became wider, specific surface area was reduced and powder structure became less solid. As the inlet speed of solution decreased, formation rate and crystallization of $NiFe_2$$O_4$ phase significantly increased.

본 연구에서는 새도우마스크 제조공정 중 발생되는 Fe-Ni 계 폐산용액을 효율적으로 재활용하기 위하여 폐산용액을 자체 제작한 분무열분해 system을 이용하여 분무열분해시킴에 의해 평균입도 100nm 이하의 니켈 페라이트($NiFe_2$$O_4$)나노 분발을 제조하였으며 반응온도, 용액의 농도 및 용액 유입속도의 반응인자들의 변화에 따른 생성된 분발의 특성변화를 파악하였다. 반응온도가 800∼$1100^{\circ}C$ 로 증가함에 따라 분무열분해 공정에 의해 생성된 분말의 평균입도가 현저히 증가하였고 점점 치밀한 조직을 나타내었으며 비표면적은 크게 감소하였다. 반응온도의 증가에 따라 니첼 페라이트 상의 생성비율 및 결정성이 증가하였다. 원료용액의 농도가 증가됨에 따라 분말의 평균입도는 점점 증가하고 비표면적은 감소하는 반면 입도분포는 더욱 불규칙하게 나타났다. 용액의 농도 증가에 따라 니켈 폐라이트 상의 생성비율 및 결정성은 현저히 증가하고 있었다. 용액의 유입속도 증가에 따라 분말들의 평균입도는 현저히 증가하고 비표면적은 감소하는 반면 입도분포는 불규칙하게 되며 조직의 치밀성도 감소하였다. 용액의 유입속도 감소에 따라 니켈 폐라이트 상의 결정성 및 생성비율이 현저히 증가하고 있었다.

Keywords

References

  1. Nakamura, T, and Okano, Y, 1996: Electro MagneticProperties of Mn-Zn Ferrite, Proceeding of the ICF 7, Cl-101
  2. Yamamoto, Y., Makino, A., and Nikaidou, T., 1996: Electricand Magnetic Properties of Ta-Doped Polycrystalline Mn-Zn Ferrite, Proceeding of the ICF 7, C1-121
  3. Pebler, A. R., 1990: Preparation ofSmall Particle StabilizedZirconia by Aerosol Pyrolysis, J. Mater. Res., 5, https://doi.org/10.1557/JMR.1990.0680
  4. Pluym, T. C., Lyons, S. W., Powell, Q. H., Gurav, A. S., and Kodas, T. T., 1993: Palladium Metal and Palladium Particle Production by Spray Pyrolysis, Mat. Res. Bull., 28, 369-376 https://doi.org/10.1016/0025-5408(93)90070-T
  5. Majumdar, D., Shefelbine, T. A., and Kodas, T. T, 1996: Copper(I) Oxide Powder Generation by Spray Pyrolysis, LMater. Res., 11, 2861-2868 https://doi.org/10.1557/JMR.1996.0361
  6. Yu, J. K., and Park, H. B., 2002: A Study on theManufacture of the CuO Powder from Copper ChlorideSolution by Spray Pyrolysis Process, Korean Journal Materials Research, 12(1), 58-67 https://doi.org/10.3740/MRSK.2002.12.1.058
  7. Yu, J. K., Suh, S. K., Choi, J. H., and Sohn, J. G., 2002:Manufacture of Ultra Fine CuO Powder froin WasteCopper Chloride Solution by Spray Pyrolysis Process,Geosystem Engneenng, 5(1), 13-19 https://doi.org/10.1080/12269328.2002.10541182