초록
상대적으로 큰 비표면적으로 인해 야기될 수 있는 건조수축균열은 보통 포틀랜드시멘트를 사용한 라텍스개질 콘크리트(LMC) 및 초속경 시멘트를 사용한 라텍스개질 콘크리트(RSLMC) 덧씌우기에서 주요 관심사항이다. 우리나라에서는 LMC와 RSLMC의 현장 적용을 위해 강도와 내구특성 측면에서 활발히 연구되어 왔으나 건조수축특성에 관한 연구는 전무한 상태이다. 따라서, 본 논문의 목적은 LMC와 RSLMC의 건조수축특성에 관하여 시멘트 종류(보통 포틀랜드 시멘트, 초속경시멘트), 라텍스 혼입률(0, 5, 10, 15, 20%)을 주요 실험 변수로 하여 연구하고자 하였다. 양생방법으로는 60%의 상대습도와 $20^{\circ}C$의 온도로 하였으며, 건조수축용 시편은 디지털 Demec 게이지로 측정하였다. 실험 결과를 통하여 LMC와 RSLMC의 건조수축량은 OPC와 RSC보다 상당히 감소되는 것으로 나타났다. 이것은 콜로이드같은 라텍스의 특성이 수분 증발을 억제함으로써 향상되는 보습성과 라텍스 필름막에 의한 시멘트 수화물과 골재간의 상호연결작용으로 기인되는 것으로 판단된다.
Drying shrinkage cracking which may be caused by the relatively large specific surface is a matter of grave concern for latex modified concrete(LMC) overlay and rapid-setting cement latex modified concrete(RSLMC) overlay. LMC and RSLMC were studied for field applications very actively in terms of strength and durability in Korea. However, there were no considerations in drying shrinkage. Therefore, the purpose of this dissertation was to study the drying shrinkage properties of LMC and RSLMC with the main experimental variables such as cement types(ordinary portland cement, rapid setting cement), latex contents(0, 5, 10, 15, 20%) and curing days at a same controlled environment of 60% of relative humidity and $20^{\circ}C$ of temperature. The drying shrinkage for specimens was measured with a digital dial gauge of Demec. The test results showed that the drying shrinkage of LMC and RSLMC were considerably lower than that of OPC and RSC, respectively. This might be attributed to the interlocking of hydrated cement and aggregates by a film of latex particles, water retention due to hydrophobic, and colloidal properties of the latexes resulting in reduced water evaporation.