한국CDE학회논문집 (Korean Journal of Computational Design and Engineering)

  • 제8권3호
  • /
  • Pages.189-200
  • /
  • 2003
  • /
  • 2508-4003(pISSN)
  • /
  • 2508-402X(eISSN)
한국CDE학회 (Society for Computational Design and Engineering)
권호 표지

차체 조립용 용접 지그 설계 전용 CAD시스템 개발

Development of a Dedicated CAD System for Welding Jigs for Automotive Body Assembly

  • 조병철 (국민대 자동차공학전문대학원) ;
  • 이상헌 (국민대 자동차공학전문대학) ;
  • 김형준 (GM 대우자동차 공기) ;
  • 우윤환 (국민대 자동차공학전문대학) ;
  • 이강수 (한밭대 기계공학부)
  • 발행 : 2003.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper introduces the development of a three-dimensional jig design system for automotive body welding assembly. Recently, three-dimensional CAD systems have been introduced in the jig design area, because they reduce errors in design process and the design result can be used readily for virtual manufacturing simulation. However, to facilitate three-dimensional jig design, it is essential to customize three-dimensional CAD system for this specific design area. To accomplish this object, we first standardized the parts and units in a jig assembly, and then built the standard part library. We also developed the dedicated 3D design capabilities of jig units and a jig base. By using this system, design can be performed more intuitively, and verification and simulation of design results can be done more easily. The proposed system has been implemented using the UG/Open API of the Unigraphics system.

키워드

참고문헌

  1. 차일남 외，‘최신 치공구 설계,’ 대광서림，1994
  2. 장덕기，'치공구 설계,' 영지문화사, 1986
  3. 최태주，‘치공구 구조와 설계 제도,’ 기전연구사，1985
  4. CAMLab., ‘http:// http://www.engr.siu.edu/tech/rong/,' Southern Illinois Univ, Carbondale, IL, USA
  5. Wu, Y., Rong, Y. and Chu, T. C., 'Automated Generation of Dedicated Fixture Design,' International Journal of Computer Applications in Technology, Vol. 10, No. 3-4, pp. 213-235, 1997
  6. Rong, Yiming and Bai. Yong., 'Automated Generation of Fixture Configuration Design,' Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol. 119, No.2, pp.208-219, 1997
  7. Nee, A. Y. C., Bhattacharyya, N. and Poo, A. N., 'Appling A.I. in Jigs and Fixtures Design,' International Conference on Intelligent Manufacturing System, Budapest, Hungary, pp. 195-200, Jun 16-19 1986
  8. GM대우자동차 생산기술연구소，'지그 설계 교육 교안,' GM대우자동차, pp. 71-98, 1998
  9. Jung, Y.-H., ‘Implementation of Concurrent Engineering for Large Assembly Design: Part (I) - Assembly-centric Modeling Methodology as BOM Structure,' Transactions of the Society of CAD/CAM Engineers, Vol. 2, No.2, pp. 93-102, June 1997
  10. Jung, Y.-H., 'Implementation of Concurrent Engineering for Large Assembly Design: Part (II) - Development of a Digital Mock-Up System for Reducing Design Changes,' Transactions of the Society of CAD/CAM Engineers, Vol. 2, No.2, pp. 103-110, June 1997
  11. 김덕표，김대영，김윤오，'CADRA를 이용한 Jig 설계 시스템 구축,‘ 한국CAD/CAM학회지，pp. 45-49, 1997
  12. 김형규，박홍석，‘솔리드 기반의 지그 설계 시스템,’ 한국 CAD/CAM학회 학술 발표회 논문집, pp. 39-43, 2000
  13. Electronic Data System Corporation, Unigraphics Division, UG/OPEN API Reference Version 18.0, 2001