International Journal of Precision Engineering and Manufacturing

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Geometric Accuracy Measurement of Machined Surface Using the OMM (On the Machine Measurement) System

  • Published : 2003.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

Machining information such as form accuracy and surface roughness is an important factor for manufacturing precise parts. To this regard, OMM (On the Machine Measurement) has been researched for last several decades to alternate CMM (Coordinate Measurement Machine) process. In this research, the OMM system with a laser displacement sensor was developed for measuring form accuracy and surface roughness of the machined workpiece on the machine tool. The surface roughness was estimated comparing the sensory signal with the reference data measured from master specimen. Also, form accuracy was determined from the moving averaged raw data. In addition, the geometric error map constructed beforehand using the geometric errors of the machine tool was used to compensate the obtained form accuracy. The overall performance was compared with CMM result, and verified the feasibility of the measurement system.

Keywords

References

  1. Owen, J. V., 'CMMs on the Shop Floor,' Manufacturing Engineering, pp. 66-70, April 1991
  2. Keizo, D., 'Die & Mold 3-DimensionalMeasuring on the Machine,' Conf. on Die and Mold Technology, pp. 208-209, 1994
  3. Kim, S. H. and Kim, I. H., 'The Development and Evaluation of OMM(On-the-Machine Measuring) System using Scanning Probe,' J. of the Korean Society of Precision Engineers, Vol. 13, No.10, pp. 71-77, 1996
  4. Lee, S. W. and Kim, S. H., 'Development of On-the-Machine Measurement(OMM) System,' J. of Industrial Engineering Interface, Vol. 11, No. 1, pp.199-205,1998
  5. Lee, S. J., Kim, S. H., Kim, O. H., 'The Analysis of Measuring Error in OMM System,' J. of the Korean Society of Precision Engineers, Vol. 15, No.5, pp.34-42, 1998
  6. Lee, S. J., Kim, S. H., Kim, O. H., 'The OMM system for machined form and surface roughness measurement concerned with volumetric error,' J. of the Korean Society of Precision Engineers, Vol. 17, No.7, pp. 232-240, 2000
  7. Kim, S, H., Ko, T. J., Ahn, J. H., 'Elimination of settling error due to clamping forces in on machine measurement,' Int'l J. of Advanced Manufacturing Technology, Vol, 19, pp. 573-578, 2002 https://doi.org/10.1007/s001700200062
  8. Cho, M. W., Lee, S. H. and Sea, T. I., 'On-Machine Measurement of Sculptured Surface Based on CAD/CAM/CAl Integration,' J. of the Korean Society of Precision Engineers, Vol. 16, No. 10, pp. 172-181, 1999
  9. Kreuci, J, V., 'CMM Measurement Enhancement Using Probe Compensation Algorithms,' SME Technical Paper MS90-09, 1990
  10. Taylor, A., 'Performance Characteristics of Touch Trigger Probes,' SME Technical Paper MS90-266, 1990
  11. Reshetov, D. N. and Portman, V. T., 'Accuracy of Machine Tools,' ASME Press, 1988
  12. Cho, J. H., Cho, M. W., Kim, K., Volumetric Error Analysis of a Multi-axis Machine Tool Machining a Sculptured Surface Workpiece, Int. J. Prod. Res., Vol. 32, No, 2, pp. 345-363, 1994 https://doi.org/10.1080/00207549408956937