참고문헌
- J. Phys. Chem. Solids v.57 no.3 A neutron scattering investigation of cubic stabilized zirconia (CSZ) Ⅱ. Lattice dynamics of Y- and Ca-CSZ D.N.Argyriou;M.M.Elcombe https://doi.org/10.1016/0022-3697(95)00156-5
- J. Am. Ceram. Soc. v.85 no.6 Inhomogeneity of grainboundary resistivity in calcia-stabilized ziroconia J.Lee;J.Lee;D.Kim https://doi.org/10.1111/j.1151-2916.2002.tb00324.x
- J. Kor. Ceram. Soc. v.33 no.10 Fabrication and characteristics of Y-TZP/Ce-TZP structural ceramics J.Lee;Y.Lee;Y.Kim;K.Oh;H.Park
- J. Am. Ceram. Soc. v.65 no.12 Stability of tetragonal ZrO₂ particles in ceramics matrices N.Claussen;W.M.Kriven;M.Ruhle https://doi.org/10.1111/j.1151-2916.1982.tb09946.x
- J. Am. Ceram. Soc. v.72 no.5 Structural changes by compressive stresses of 2.0-mol% yttria-stabilized tetragonal ziroconia polycrystals Y.Kitano;Y.Mori;A.Ishitani;T.Masaki https://doi.org/10.1111/j.1151-2916.1989.tb06232.x
- J. Kor. Ceram. Soc. v.28 no.10 Fabrication of zirconia film by sol-gel processign: (Ⅱ) The doping effect of CaO on their microstructure and phase transition S.Kim;M.Yoon;I.Song
- J. Kor. Ceram. Soc. v.29 no.7 The fabrication of zirconia fibers from sol-gel process K.Hwang;T.Yoon;K.Koh;E.Kim
- J. Eur. Ceram. Soc. v.21 The manufacture of partially-stabilized and fully-stablized zirconia fibers blow spun from an alkoxide derived aqueous sol-gel precursor R.C.Pullar;M.D.Taylor;A.K.Bhattacharya https://doi.org/10.1016/S0955-2219(00)00178-3
- J. Am. Ceram. Soc. v.70 Highstrength zirconia fibers D.B.Marshal;F.L.Lange;P.D.Morgan
- J. Mater. Res. v.16 no.8 Synthesis and characterization of partially and fully stabilized zirconia fibers made from an inorganic precursor A.Hartridge;M.D.Taylor;A.K.Bhattacharya https://doi.org/10.1557/JMR.2001.0327
- J. Kor. Ceram. Soc. v.33 no.11 Preparation of Y₂O₃ doped ZrO₂bulk ceramics by the sol-gel method C.Yoon;D.Shin;S.Han
- Thin Solid Films v.392 Densification an aging of ZrO₂films prepared by sol-gel R.Brenier;A.Gagnaire https://doi.org/10.1016/S0040-6090(01)01009-4
- J. Sol-Gel Sci. & Tech. v.15 Sol-gel deposition of ZrO₂films in air and in oxygen-free atmosphere for chemical protection of 304 stainless steel: a comparative corrosion study F.Perdomo L.;P. De Lima-Neto;M.A. Aegerter;L.A. Avace https://doi.org/10.1023/A:1008769231899
- J. Am. Ceram. Soc. v.54 no.5 Infrared and Ramam spectra of zirconia polymorphs C.M.Plillippi;K.S.Mazdiyasni https://doi.org/10.1111/j.1151-2916.1971.tb12283.x
- J. Kor. Ceram. Soc. v.31 no.10 Preparation of MgO-ZrO₂ fibers by sol-gel method and their characterization C.Whang;H.Eun
-
J. Mater. Res.
v.16
no.9
Annealing effect on in-plane alignment and surface morphology of epitaxial BI₄Ti₃
$O_{12}$ thin films prepared by the chemical solution deposition K.Hwang;Y.Park https://doi.org/10.1557/JMR.2001.0345 - J. Biomed. Mater. Res v.29 Effect of titanium surface roughness on proliferation. Differentiation, and protein synthesis of human osteoblast-like cells(MG63) J.Y.Martin;Z.Schwartz;T.W.Hummert https://doi.org/10.1002/jbm.820290314