Abstract
In general, the extraction and recognition of identifier is very hard work, because the scale or location of identifier is not fixed-form. And, because the provided image is contained by camera, it has some noises. In this paper, we propose methods for automatic detecting edge using canny edge mask. After detecting edges, we extract regions of identifier by detected edge information's. In regions of identifier, we extract each identifier using contour tracking algorithm. The self-generation supervised learning algorithm is proposed for recognizing them, which has the algorithm of combining the enhanced ART1 and the supervised teaming method. The proposed method has applied to the container images. The extraction rate of identifier obtained by using contour tracking algorithm showed better results than that from the histogram method. Furthermore, the recognition rate of the self-generation supervised teaming method based on enhanced ART1 was improved much more than that of the self-generation supervised learning method based conventional ART1.
운송 컨테이너의 식별자를 추출하고 인식하는 것은 컨테이너 식별자들의 크기나 위치가 정형화되어 있지 않고 외부의 잡음으로 인하여 식별자의 형태가 훼손되어 있기 때문에 어렵다. 본 논문에서는 이러한 특성을 고려하여 컨테이너 영상에 대해 Canny 마스크를 이용하여 에지를 검출하고, 검출된 에지 정보를 이용하여 수직블록과 수평블록을 추출하여 컨테이너의 식별자 영역을 추출한다. 추출된 컨테이너의 식별자 영역에서 윤곽선 추적 알고리즘을 이용하여 개별 식별자를 추출하며, 그들의 인식을 위해서는 개선된 ARTl과 지도 학습 방법을 결합한 개선된 성능의 자가 생성 지도 학습 알고리즘을 제안하여 적용한다. 제안된 방법의 성능을 확인하기 위하여 운송 컨테이너 영상들을 대상으로 실험 결과, 윤곽선 추적 알고리즘을 이용한 식별자의 추출 방법이 히스토그램을 이용한 식별자의 추출 방법보다 추출률이 개선되었고 인식 결과에서도 개선된 ART1 기반 자가 생성 지도 학습 방법이 기존의 ART1 기반 자가 생성 지도 학습 방법보다 인식률이 향상되었다.