Flowing Ability and Mechanical Properties of Polypropylene Fiber Reinforced High Performance Concrete

  • Kim, Young-Ik (Institute of Agricultural Science, College of agriculture and Life Sciences, Chungnam National University) ;
  • Sung, Chan-Yong (Department of Agricultural Engineering, College of Agriculture and Life Sciences, Chungnam National University)
  • 발행 : 2003.12.01

초록

This study was performed to examine the flowing ability and filling ability of polypropylene fiber reinforced high performance concrete. The slump flow was decreased with increasing the polypropylene fiber content, rapidly. At the box-type filling ability, the difference of box height was increased with increasing the fiber content and the box-type passing ability was closed in fiber content 1 %. The final flowing distance of L-type was decreased with increasing the fiber content. Also, it was decreased above 0.75% of polypropylene fiber content, rapidly. The filling ability of L-type was badly showed above polypropylene fiber content 0.75%. Also, the compressive strength was decreased with increasing the fiber content, but the flexural strength was shown higher than that of the concrete without fiber. At the impact resistance, drop numbers for reaching in final fracture were increased with increasing the fiber content. Also, the drop numbers for reaching initial fracture of 1mm were increased with increasing the fiber content. At the acid resistance, the percent of original mass was decreased with increasing the fiber content.

키워드

참고문헌

  1. Journal of ACI v.78 no.3 Properties of high strength concrete subject to short-term loads Carrasquillo,R.L.;A.H.Nilson;F.O.Slate
  2. Cement and Concrete Research v.29 The influence of mixing on the rheology of fresh cement paste David,W.a.;A.W.Saak;H.M.Jennings https://doi.org/10.1016/S0008-8846(99)00124-6
  3. Proceedings of RILEM International conference on Production Methods and Methods and Workability of Fresh Concrete Design and testing of self-compacting concrete Domone,P.L.;H.W.Chai
  4. Journal of Materials in Civil Engineering v.4 no.4 Normal and high strength fiber reinforced concrete under compression Elzeldin,A.S.;P.N.Balaguru https://doi.org/10.1061/(ASCE)0899-1561(1992)4:4(415)
  5. Cement and Concrete Research v.27 no.9 Properties of high performance concrete containing shrinkage-reducing admixture Folliard, Kevin. J.;Neal S. Berke https://doi.org/10.1016/S0008-8846(97)00135-X
  6. Coment and Concrete Composites v.19 no.4 Mechanical properties of steel fiber reinforced, high-strength, lightweight concrete Jianming Gao.;Wei Sun;Morino. Keiji. https://doi.org/10.1016/S0958-9465(97)00023-1
  7. Cement and Concrete Research v.25 no.1 Effec of different supplementary cementitious materials on mechanical properties of high performance concrete Khatri,R.P.;V.Sirvivatnanon https://doi.org/10.1016/0008-8846(94)00128-L
  8. Transportation Research Board American Concrete Pavement Associatin What is "high-perfor-mance concrete" The Expressway Publishing Project Kuennen,T.
  9. Journal of the American Ceramic Society v.74 no.9 Characterization of interfacial properties in fiber reinforced cementitious composites Mobasher,Z.B.;S.P.Shah https://doi.org/10.1111/j.1151-2916.1991.tb08276.x
  10. Journal of the Korean Society of Agricultural Engineer v.39 no.1 Experimental study on engineering properties of lightweight aggregate concrete Sung,C.Y.;R.N.Swamy
  11. Journal of the Korean Society of Agricultural Engineer v.40 no.4 Physical and mechanical properties of rice straw ash concrete Sung,C.Y.;Y.I.Kim
  12. High-performance concrete: a state-of art report trategic, highway research program Zia,P.;S.Ahmad