DOI QR코드

DOI QR Code

졸-겔법으로 제조된 SiO2막의 적외선 복사특성에 관한 연구

Infrared Radiation Properties for SiO2 Films Made by Sol-Gel Process

  • 발행 : 2003.10.01

초록

FT-IR and thermograph were used to investigate the infrared radiation characteristics of $SiO_2$film made by the sol-gel method. FT-IR spectrum of the $SiO_2$film showed high infrared absorption by Si-O-Si vibration at 1220, 1080, 800 and cm$460^{-1}$ The infrared absorption and radiation wavelength ranges of the $SiO_2$film measured by the integration method coincided with the reflection method, and the infrared emissivity was 0.65, equally. Depending on the bonding of elements, the infrared emissivity was high in the wavelength range where the infrared absorption rate was high, that follows the Kirchhoff's law. The emissivity showed the highest value in the wavelength range between $8∼10\mu\textrm{m}$. $SiO_2$film was considered as an efficient materials for infrared radiator at temperature below 10$0^{\circ}C$. The heat radiation temperature was $117^{\circ}C$ for the aluminum plate, but $146^{\circ}C$ for the $SiO_2$film after 7 minutes heat absorption, consiquently, $29^{\circ}C$ higher than the former.

키워드

참고문헌

  1. H. Dislich, Angew, Chem. Int. Ed. Engl., 10, 363 (1971) https://doi.org/10.1002/anie.197103631
  2. S. Sakka, Mater. Res. Soc. Symp. Proc, 32, 91 (1984) https://doi.org/10.1557/PROC-32-91
  3. H. Dislich, J. Non-Cryst. Solid, 57, 371 (1983) https://doi.org/10.1016/0022-3093(83)90425-8
  4. S. Sakka and T. Yoko, Structure and Bonding, 77, Springer Verlag, 89 (1991)
  5. L. M Thomas, Sol-Gel Technology for Thin Films, Fibers, Performs, Electronic and Specialty Shapes, New Jersey (1988)
  6. N. Tohge, New Ceramics, 7, 1 (1995)
  7. F. Geotti-Bianchini, M. Guglielmi, P. Polato and G. D. Soraru, J. Non-Crystal. Solids, 63, 251 (1984) https://doi.org/10.1016/0022-3093(84)90404-6
  8. S. A. Hujiya, Painting Techology, 3, 95 (1990)
  9. S. A. Hujiya, Painting Engineering, 25(3), 241 (1990)
  10. F. P. Incropera and D. P. Dewitt, Fundamentals of heat and mass transfer, 4th ed., p.672, New York, Chichester, Brisbane, Toronto, Singapore, (1996)
  11. Handbook of Ceramic Engineering, The Ceramic Society of Japan, 296 (1989)
  12. J. Gallardo, A. Duran, D. Di Martino and R.M Almeida, J. Non-Crystalline Solids, 298, 219-225 (2002) https://doi.org/10.1016/S0022-3093(02)00921-3
  13. C. C. Perry, X. Li and D. N. Waters, Spectrochim. Acta 47. 1487 (1991) https://doi.org/10.1016/0584-8539(91)80240-J
  14. C. J. Brinker and G. W. Scherer, Sol-Gel Science, p.552, Boston, San Diego, New York, London, Sydney, Tokyo, Toronto (1990)
  15. N. Primeau, C. Vautey and M. Langlet, Thin Solid Film, 310 47-56 (1997) https://doi.org/10.1016/S0040-6090(97)00340-4
  16. D. A. Kouichi, E. G. Yohinobu and S. A. Hisao, Far Infrared Ray, p.192, Ningentorekishisha, Tokyo, (1999)
  17. B.C Kang, J.J Choi and K.H Kim, Journal of the Korean Institute of Surface Engineering, 26(3), 149 (2002)
  18. N. S. Sena, Eletro-Heat, 22, 32-38 (1985)