Journal of Mechanical Science and Technology

  • 제17권12호
  • /
  • Pages.2042-2052
  • /
  • 2003
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

An Experimental Study on Heat Transfer Characteristics with Turbulent Swirling Flow Using Uniform Heat Flux in a Cylindrical Annuli

  • Chang, Tae-Hyun (Division of Mechanical and Automation Engineering, Kyungnam University) ;
  • Lee, Kwon-Soo (Department of Mechanical Engineering, Kyungnam University Graduate School)
  • 발행 : 2003.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

An experimental study was performed to investigate heat transfer characteristics of turbulent swirling flow in an axisymmetric annuli. The static pressure, the local flow temperature, and the wall temperature with decaying swirl were measured by using tangential inlet conditions and the friction factor and the local Nusselt number were calculated for Re=30000∼70000. The local Nusselt number was compared with that obtained from the Dittus-Boelter equation with swirl and without swirl. The results showed that the swirl enhances the heat transfer at the inlet and the outlet of the test tube.

키워드

참고문헌

  1. Rothfus, R. R., 1948, Velocity Distribution and Fluid Friction in Concentric Annuli, Ph. D. thesis, Carnegie Institute of Technology
  2. Brighton, J. A. and Jones, J. B., 1964, 'Fully Developed Turbulent Flow in Annuli,' J. of Basic Engineering, pp. 835-843
  3. Alan, Q., 1967, 'An Experimental Study of Turbulent Flow Through Concentric Annuli,' Int. J. Mech. Si, Vol. 9, pp, 205-221 https://doi.org/10.1016/0020-7403(67)90030-6
  4. Kay, W. M. and Leung, E. Y., 1963, 'Heat Transfer in Annular Passages: Hydro dynamically Developed Flow with Arbitrarily Prescribed Heat Flux,' Int. J. Heat Mass Transfer, Vol. 6, pp. 537 - 557 https://doi.org/10.1016/0017-9310(63)90012-7
  5. Tuft, D. B. and Brandt, H., 1990, 'Forced Convection Heat Transfer in a Spherical Annulus Heat Exchange,' J. of Heat Transfer, Vol. 104, pp.670-677 https://doi.org/10.1115/1.3245184
  6. Molki, M., Astill, K. N. and Leal, E., 1990, 'Convective Heat-mass Transfer in Temperature Region of a Concentric Annulus having a Rotating inner Cylinder,' Int. J. Heat and Fluid Flow, Vol. 11, No.2 https://doi.org/10.1016/0142-727X(90)90005-V
  7. Garimella, S. and Chritensen, R. N., 1995, 'Heat Transfer and Pressure Drop Characteristics of Spirally Flute Annulli : Part II Heat Transfer,' J. of Heat, Vol. 117, pp. 55-68
  8. Chigier, A. N. and Beer, J. M., 1964, 'Velocity and Static Pressure Distributions in Swirling Air Jets Issuing From Annular and Divergent Nozzle,' ASME, J. of Basic Engineering, pp.788-796
  9. Scott, C. J. and Raske, D. R., 1973, 'Turbulent Viscosities for Swirling Flow in a Stationary Annulus,' ASME J. of Fluid Engineering, pp. 557-566
  10. Milar, D. A., 1979, 'A Calculation of Laminar and Turbulent Swirling Flows in Cylindrical Annuli,' ASME, Winter Annual Meeting New York Dec. pp. 89-98
  11. Clayton, B. R., and Morsi, Y. S. M., 1985, 'Determination of Principal Characteristics of Turbulent Swirling Flow Along Annuli,' Int. J. Heat & Fluid Flow, Vol. 6, No. 1, pp. 31-41 https://doi.org/10.1016/0142-727X(85)90029-3
  12. Reddy, P. M., Kind, R. J. and Sjolander, S. A., 1987, 'Computation of Turbulent Swirling Flow in an Annular Duct,' Num.. Method in Laminar and Turbulent Flow, pp.470-481
  13. Chang, T. H. and Kim, H. Y., 2001, 'An Investigation of Swirling Flow in a Cylindrical Tube,' KSME Int. J., Vol. 15, No. 12, pp. 1892-1899
  14. Ahan, S. W., Lee, Y. P. and Kim, K. C., 1993, 'Turbulent Fluid Flow and Heat Transfer in a Concentric Annuli with Square-Ribbed Surface Roughness,' J. of KSME(B), Vol. 17, No.5, pp. 1297-1303
  15. Kim, K. C., Ahan, S. W. and Lee, B. G., 1994, 'Turbulent Structure in Flow in Concentric Annuli with Rough Outer Wall,' J. of KSME (B), Vol. 18, No.9, pp.2443-2453
  16. Kim, K. C., Ahan, S. W. and Jung, Y. B., 1995 'Effect of Surface Roughness on Turbulent Concentric Annular Flows,' J. of KSME (B), Vol. 19, No.7, pp. 1749-1757
  17. Ahan, S. W., 1999, 'Friction Factors for Flow in Concentric Annuli with Roughened Wall,' J. of KSME(B), Vol. 23, No.5, pp. 587-592
  18. Sparrow, E. M. and Chaboki, A., 1984, 'SwirlAffected Turbulent Fluid Flow and Heat in a Circular Tube,' J. of Heat Transfer ASME, Vol. 106, pp.766-773 https://doi.org/10.1115/1.3246750
  19. Medwell, J. O., Chang, T. H. and Kwon, S. S., 1989, 'A Study of Swirling Flow in a Cylindrical Tube,' Korean J. of Air-Conditioning and Refrigeration Engineering, Vol. 1, pp. 265-274