Journal of Mechanical Science and Technology

  • 제17권12호
  • /
  • Pages.1844-1854
  • /
  • 2003
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

System Modeling and Robust Control of an AMB Spindle : Part I Modeling and Validation for Robust Control

  • Ahn, Hyeong-Joon (Department of Mechanical & Aerospace Engineering, University of Virginia) ;
  • Han, Dong-Chul (School of Mechanical & Aerospace Engineering, Seoul National University)
  • 발행 : 2003.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper discusses details of modeling and robust control of an AMB (active magnetic bearing) spindle, and part I presents a modeling and validation process of the AMB spindle. There are many components in AMB spindle : electromagnetic actuator, sensor, rotor, power amplifier and digital controller. If each component is carefully modeled and evaluated, the components have tight structured uncertainty bounds and achievable performance of the system increases. However, since some unknown dynamics may exist and the augmented plant could show some discrepancy with the real plant, the validation of the augmented plant is needed through measuring overall frequency responses of the actual plant. In addition, it is necessary to combine several components and identify them with a reduced order model. First, all components of the AMB spindle are carefully modeled and identified based on experimental data, which also render valuable information in quantifying structured uncertainties. Since sensors, power amplifiers and discretization dynamics can be considered as time delay components, such dynamics are combined and identified with a reduced order. Then, frequency responses of the open-loop plant are measured through closed-loop experiments to validate the augmented plant. The whole modeling process gives an accurate nominal model of a low order for the robust control design.

키워드

참고문헌

  1. Ahn, H. J., Jeon, S. and Han, D. c., 2000, 'Error Analysis of the Cylindrical Capacitive Sensor for Active Magnetic Bearing Spindles,' J. of Dynamics systems, measurement, and control, trans. of ASME, March, Vol. 122, pp. 102-107. https://doi.org/10.1115/1.482433
  2. D&M Technology Co., 2001, RODAP , Korea
  3. Fittro, R. L., 1998, 'A High Speed Machining Spindle with Active Magnetic Bearings: Control Theory, Design, and Application,' Ph. D. dissertation, University of Virginia.
  4. Ha, Y. H. and Lee, C. W., 1997, 'In-situ Modal Testing and Parameter Identification of Active Magnetic Bearing System by Magnetic Force Measurement and the Use of Directional Frequency response functions,' Transactions of KSME A., Vol. 21, No.7, pp.1156-1165
  5. Huang, S. M., Green, R. G., Plaskowski, A. and Beck, M. S., 1988, 'A High Frequency Strayimmune Capacitance Transducer based on the Charge Transfer Principle,' IEEE Transactions on Instrumentation and Measurement, Vol. 37, No.3, pp. 368-373 https://doi.org/10.1109/19.7457
  6. Jeon, S., Ahn, H. J., Chang, I. B. and Han, D. C., 2001, 'A New Design of Cylindrical Capacitive Sensor for On-line Precision Control of AMB Spindle,' IEEE Transactions on Instrumentation and measurement, Vol. 50No. 3, pp. 757-763 https://doi.org/10.1109/19.930450
  7. Lewis, F., 1992, Applied Optimal Control & Estimation, Prentice-Hall International, Inc.
  8. Losch, F., Gahler, C. and Herzog, R., 1998, '${\mu}$-Synthesis Controller Design For a 3MW Pump Running In AMBs,' Proceedings of the 6th ISMB, MIT, Massachusetts, USA, pp. 415-428
  9. Pintelon, R., Guillaume, P., Vandersteen, G. and Rolain, Y., 1998, 'Analyses, Development, and Applications of TLS Algorithms in Frequency Domain System Identification,' SIAM J. Matrix Anal. Appl. https://doi.org/10.1137/S0895479896309074
  10. Sanathanan, C. K. and Koerner, J., 1963, 'Complex Function Synthesis as a Ratio of Two Complex Polynomials,' IEEE Transaction of Automatic Control, AC-8, 37
  11. Siegwart, R., Larsonneur, R. and Traxler, A., 1990, 'Design and Performance of a High Speed Milling Spindle in digitally Controlled Active Magnetic Bearings,' Proceedings of the 2nd ISMB, Tokyo, Japan, pp. 197-204
  12. Stephens, L. S., 1995, 'Design and Control of Active Magnetic Bearings for a High Speed Machining Spindle,' Ph. D. dissertation, University of Virginia